Epson EB-1410Wi User Manual page 28

Installing the Projector
• Project images from in front of
the screen. (Front projection)
a
Attach the feet when using the projector on a surface such as a desk.
s "Attaching the feet (Only models with feet supplied)"
• Place the projector vertically and
project images from in front of
the screen. (Front/Upside Down
projection)
• Project images from behind a
translucent screen. (Rear projec‐
tion)
p.14
• Place the projector vertically and
project images from behind the
screen (Rear/Upside Down pro‐
jection)
Warning
• A special method of installation is required when suspending the projector
from a wall or ceiling. If it is not installed correctly, it could fall causing an
accident and injury.
• If you use adhesives on the wall mount plate fixing points or the ceiling
mount fixing points to prevent the screws from loosening, or if you use
things such as lubricants or oils on the projector, the projector case may
crack causing it to fall from its mount. This could cause serious injury to
anyone under the mount and could damage the projector.
When installing or adjusting the mount, do not use adhesives to prevent the
screws from loosening and do not use lubricant or oil and so on.
• Do not cover the projector's air intake vent or air exhaust vent. If either of
the vents are covered, the internal temperature could rise and cause a fire.
28