Clearance Charts - Vermont Castings Encore Flexburn 2040 Homeowner's Installation And Operating Manual

Encore ® FlexBurn ™ 2040 Non-Catalytic / Catalytic Woodburning Stove
For use with either 6" or 8" flue collar/chimney connection
Top Exit, 8" single
wall connector without
shields, vertical flue col-
lar heat shield installed
Top exit, single-wall
chimney connector heat
shield , vertical flue col-
2
lar h.s. installed
Rear exit
No flue collar heat
shield
Top exit, double-wall
chimney connector ,
3
vertical flue collar heat
shield installed
The provided rear shroud must be used in all installations. The flue collar heat shield must be used in all vertical
installations.
1. A ceiling heat shield 24" (610 mm) in diameter and suspended 1" (25 mm) from the ceiling must surround the
pipe in installations where chimney penetrates the ceiling.
2. The connector pipe heat shield must extend 36" (914 mm) above flue collar.
3. Using listed double wall oval to round adapter when installing optional 8" oval flue collar.
Top exit, single wall
6" connector without
shields, vertical flue col-
lar heat shield installed
12
clearance chart
Unprotected Surfaces
Stove installed
parallel to wall
Side To Rear
Shroud
(A) 19" (B) 20"
(483 mm) (508 mm)
(G) 19" (H) 10"
(483 mm) (254 mm)
(M) 22" (N) 12"
(559 mm) (305 mm)
(G) 18" (H) 7"
(457 mm) (178 mm)
6" chimney connector oNly
(A) 19" (B) 15"
(483 mm) (381 mm)
Stove clearance
Stove
in corner
corners
(C) 18Z\x"
(470 mm)
(I) 18Z\x"
(470
mm)
n/a
(I) 12"
(305 mm)
clearance to combustible in Front of Stove
All Installations (S) 48" (1219 mm)
(C) 18Z\x"
(470 mm)
protected Surfaces
Stove installed
parallel to wall
Side To Rear
Shroud
(D) 5" (E) 7"
(127 mm) (178 mm)
(J) 6" (K) 6"
(152 mm) (152 mm)
(P) 11" (Q) 12"
(279 mm) (305 mm)
(J) 4" (K) 5"
(102 mm) (127 mm)
(D) 5" (E) 7"
(127 mm) (178 mm)
Stove
in corner
1
corners
(F) 12"
(305 mm)
(L) 12"
(305 mm)
n/a
(L) 5"
(127 mm)
(F) 12"
(305 mm)
30005295