Vermont Castings Encore Flexburn 2040 Homeowner's Installation And Operating Manual page 25

Non-catalytic/catalytic woodburning stove
Table of Contents

Advertisement

waRNiNg: FiReplace SToveS eqUippeD wiTh
DooRS ShoUlD be opeRaTeD oNly wiTh DooRS
FUlly opeN oR DooRS FUlly cloSeD. iF DooRS
aRe leFT paRTly opeN, gaS aND FlaMe May be
DRawN oUT oF The FiReplace STove opeNiNg
cReaTiNg RiSkS FRoM boTh FiRe aND SMoke.
caUTioN: The encore will be hot while in operation.
keep children, clothing and furniture away. contact
may cause skin burns.
Do NoT oveRFiRe ThiS heaTeR. Over-firing may
cause a house fire, or can result in permanent damage
to the stove. If any part of the Encore glows, you are
over-firing.
ash Disposal
Routine ash removal is important for ease of maintenance,
and is important for the stove's durability. Remove ash before
it reaches the top of the ash pan. Check the level at least
once a day. Every few days, clear any ash from the outer
edges of the firebox. Most of the ash will fall through the
grate. Slice or stir the ash with a shovel or poker so that
it falls through the grate slots.
iMpoRTaNT: Check the level of ash in the ash pan before
reloading the stove. If the ash level is close to the top edge
of the pan, empty the pan according to this procedure:
Open the damper.
Open the griddle or front doors, and use a shovel or
poker to stir excess ash through the ash slots in the
grate down into the ash pan.
Close the griddle or doors, and unlatch the ash door.
(Fig. 39) It will pivot, swinging the ash pan out of the
stove.
Open
Fig. 39 Turn the ashdoor handle clockwise to open and coun-
terclockwise to close.
ST545
ashdoor
11/00
30005295
Encore
Close
®
FlexBurn
2040 Non-Catalytic / Catalytic Woodburning Stove
Fig. 40 Be sure the cover is securely attached before remov-
ing the ash pan.
Slide the cover onto the pan, making sure it is securely
closed. (Fig. 40)
Remove the ash pan, making sure to keep it level.
To keep the cover from sliding off and to keep ash from
falling on the floor, do not tilt the ash pan forward.
If the stove is in operation, close the ash door while
disposing of the ash. You may need to lift the latch end
of the door slightly to align the latch with the mating part
on the stove bottom.
Properly dispose of the ash in a metal container with a
tight-fitting lid. Store the container outdoors away from
all combustible material.
Return the ash pan to its original position in the stove,
and close and latch the ash door. (Fig. 40)
Do not operate the stove with the ash door open. This
will result in over-firing, and could cause damage to the
stove, void the warranty, or even lead to a house fire.
Empty the ash pan regularly, typically every one to three
days. The frequency will vary depending on how you
operate your Encore: ash will accumulate faster at higher
heat outputs.
Remove ash frequently and place it outdoors in a metal
container with a tight-fitting lid. Place the closed container of
ash on a noncombustible floor or on the ground, well away
from all combustible materials, pending final disposal. If
the ash is disposed of by burial in soil or otherwise locally
dispersed, it should be kept in the closed container until
all cinders have thoroughly cooled.
ST545
You can use wood ash as a garden fertilizer.
caUTioN: Never use your household or shop vacuum
cleaner to remove ash from the stove; always remove and
dispose of the ash properly.
ST566
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents