FujiFilm 3000 User Manual page 24

POSTER PRINTER
1
Cut away or fold back the excess margin area of the first sheet, using
the cutting marks provided as a guide.
2
Align the first output sheet with the second one so that the edge of
the first is against the cutting marks of the second, and so the printed
images of both halves are properly lined up. Once one sheet has been
laid over the other, fix lightly into place by applying tape to both ends
of the output sheets.
3
Apply a longer strip of tape over the tapes first applied and cut away
any excess when both halves of the output have been fixed together.
NOTE:
• Discoloration and fading may result depending on the type of tape used.
• The cutting marks are to be used as guides when cutting.
• If the left and right sides do not align properly, adjust the image of one
side so that they do.
22 Printing different poster sizes
Note that the two
halves will not be
aligned properly if the
original is not placed
correctly into the
document bay.
Cutting marks
Pasting two output sheets together
4
Insert the original once more into the document
bay, making sure it faces the same direction. Press
the START/STOP key to begin printing the right side
of the original.
5
The right half of the original will then be printed.
When the printing process is complete, cut the print
with the cutter.
NOTE: When printing in divisions, cutting marks
are automatically printed on the output.
6
Paste the two sides of the print together to form
a single poster.
NOTE: If you wish to print only the right side
of the original, press the OUTPUT SIZE key until
"A0 x 2 " appears on the message display, and
then press the START/STOP key.
Cut or fold
Lightly apply tape
to hold in place
Apply tape
to fix
into place