Table of Contents
Advertisement
Hardware Pages
The Hardware pages contain unit information and options for device information, device
naming, executive mode, and reset mode. Click the
Figure 33.
Unit Information Page
This page gives a non-configurable view of information about the connected device. Click
Unit Information
The following information displays:
•
•
•
•
Figure 34.
Device Name Page
This page allows users to assign or change the name of the connected device. Click the
Device Name
Figure 35.
To assign or change the device name:
1.
2.
To reset the name to the factory default:
Click
Hardware Global Navigation Bar
to open the page.
Part number – The Extron part number of the connected MPS 601.
Model name – The model name of the connected MPS 601.
Model description – The model description of the connected MPS 601.
Firmware version – The current firmware version of the connected MPS 601.
Unit Information Panel
icon on the Global Navigation Bar to open this page.
Device Name Page
Enter a name for the device in the name field. The name can be up to 63 alphanumeric
characters in length with no spaces between characters. If an invalid name is entered, a
red symbol appears to the right of the name field.
Click
to change the name or click
Apply
.
Reset to Default
tab to open these pages.
Hardware
to keep the previous name.
Cancel
MPS 601 • Software Configuration and Control
41
Advertisement
Table of Contents
