Kyocera FS-1750 User Manual page 34

After selecting a paper source and pressing the MODE key,ý3DSHUýKDQGOLQJý! appears. By pressing the key, the paper type settings menu appears.
After setting the correct paper type, press the EXIT key and printing starts. There is no paper cassette set (paper size, paper type) that matches with the data
for printing . Because there is no cassette that matches the data, printing is done from the MP tray. Set paper into the MP tray that matches the paper size and
type shown on the display and press the CONTINUE button to restart printing. Or, if you want to print from a different paper source press the FEED key to
displayý 8VHý DOWHUQDWLYH" and you can change the source for paper feeding. Further, you can change the paper source by pressing the FEED key.
By pressing the key, the paper type settings menu appears. After setting the correct paper type, press the EXIT key and printing starts. Mechanical error
(n=í,ýì,ýë, .)-Call a service person. The printer does not operate when a message beginning withý( is displayed. The total number of pages printed is also
indicated. Controller error (n=í,ýì,ýë, .)-Call a service person. The printer does not operate when a message beginning withý) is displayed. The total number
*(paper size) and (paper type) are displayed flashing alternately. /RDGý 03ý WUD\ (paper size)/(paper type) *(paper size) and (paper type) are displayed
flashing alternately. &DOO VHUYLFH SHUVRQ(Qãíìëêéèç &DOO VHUYLFH SHUVRQ)Qãíìëêéèç 5-9 5.5 Indicators and Messages Error Messages Table
5.3 Error Messages Message 0HPRU\ RYHUIORZ 3UHVV &217,18( 3ULQW RYHUUXQ 3UHVV &217,18( Corrective Action The total amount of data
Try adding more memory (expansion RAM). Press the CONTINUE key to resume printing. You can abandon printing by the CANCEL key. The data
transferred to the printer was too complex to print on a page. Press the CONTINUE key to resume printing.
(The page may break in some pages.) You can abandon printing by the CANCEL key. Note: After this message has been displayed, Page protect mode will be
On. To maintain optimum use of memory during printing, displayý!3DJH SURWHFW from the control panel, and re-selectý$XWR. See the last page in this
manual. Current print processing cannot continue. To print out a error report, displayý!ý3ULQWý.3'/ýHUUV from the mode select menu, and selectý2Q.
Check the error code displayed in the place ofý and refer to the appropriate descripúú tion below. íì: Abnormal format. Try turning the power off and on
again. íë: RAM DISK mode isý2II. Turn RAM DISK modeý2Q. íê: Cannot write to the disk system because it is write protected. Remove the write protection.
íç: No memory for use by disk system. Expand printer memory. ìí: Cannot format disk because host data is spooled there. Format the disk after 5HDG\ is
The memory card is accidentally removed from the printer's memory card slot during reading. If you continue reading the memory card, insert the same
memory card into the slot again. The printer again reads it from the beginning of the data. Note: We recommend that you follow the reading procedure from
the beginning to ensure correct reading of the memory card. You have inserted the wrong memory card when theý ,QVHUWý DJDLQ message was displayed.
Remove the wrong memory card from the printer's memory card slot and insert the correct memory card. The printer again reads it from the beginning of the
data. This message appears when the printer is in the ready state and the memory card is not formatted, and therefore cannot be read or written. Follow the
After selecting a paper source and pressing the MODE key,ý3DSHUýKDQGOLQJý! appears.
of pages printed is also indicated.
received by the printer exceeds the printer's internal memory.
Press the CONTINUE key to resume printing. You can abandon printing by the CANCEL key.
íé: No disk space. Clean up files. íè: Specified file not on disk.
displayed. äå: Unable to read files during the sorting (file does not exist, or corrupted).
You're reading an excerpt. Click here to read official KYOCERA
FS-1750 user guide
http://somemanuals.com/dref/324820
procedure on Section 2.