Kyocera FS-1750 User Manual page 28

13. Resource Protection 2.13. Resource Protection When you switch from the HP LaserJet emulation to another, all downloaded fonts and macros are lost.
Resource protection preserves these PCL resources in memory so that they are intact when you change the emulation back to PCL 6. By using the printer's
MODE SELECT, you can select from two resource protection modes as follows: !5HVRXUFH SURWï 3HUPDQHQW In this mode, the printer stores fonts,
macros, symbol sets, etc. in memory that were downloaded as permanent PCL resources. All temporary resources are lost when the emulation mode is
!5HVRXUFH SURWï 3HUP î 7HPS In this mode, the printer stores both permanent and temporary resources when the emulation mode is changed from PCL
6 to another or vice versa. Resource protection requires extra memory to store the downloaded fonts and macros. The total size of the printer memory
recommended for using the resource protection option is affected by several factors. See section 1.7.
Memory Expansion Installation. 2.14. Adjusting the Print Density If necessary, the print density can be adjusted from the MODE SELECT MENU. Density
The factory setting isýíê, and there is normally no need to alter this setting. When using the KIR function, please use the " íê" setting. 2-26 2.15. Setting the
Audio Warning (Buzzer) 2.15. Setting the Audio Warning (Buzzer) In addition to the message displayed when the paper supply is exhausted, or when paper
jamming occurs, an audio warning is made to sound. This is useful, for example, when the printer is in a location some distance from the user. The audio
alarm is set to ON when leaving the factory. An audio alarm corresponding to the type of printer error will sound according to the table below.
If the alarm is set to OFF, it is made not to sound. Type of Error and Corresponding Audio Alarm (Buzzer) Alarm Frequency Priority Error Message
5HSODFHý 7RQHU &OHDQý SULQWHU 5HSODFHý ý ý ZDVWHð WRQHUý ERWWOH &OHDQý SULQWHU 3UHVVý &217,18( 3DSHUý MDP
)DFHðGRZQý WUD\ SDSHUý IXOO 3DSHUý SDWKý HUURU 2SWLRQý VWDFNHU SDSHUý IXOO 5HPRYHý ý ý ý ý ý 2SWï 6WDFNHUý SDSHU
/RDGý 03ý WUD\ 0HPRU\ý RYHUIORZ 3UHVVý &217,18( 3ULQWý RYHUUXQ 3UHVVý &217,18( .3'/ý HUURU 3UHVVý &217,18( 0(025[&$5'ý HUU
3UHVVý &217,18( 5$0ý ',6.ý HUURU 3UHVVý &217,18( 2SWïý 520ý HUURU 3UHVVý &217,18( 6HWý SDSHU 3UHVVý &217,18( /RDGý &DVVHWWH
Low $GGý SDSHU Short beeps: approx. 0.8 s Long beeps: approx. 0.4 s short beeps short beeps short beeps short beeps short beeps short beeps short beeps
short beeps short beeps short beeps short beeps short beeps short beeps short beeps short beeps short beeps short beeps long beeps Remarks High -- -- -- -- *
** ** ** -- -- -- -- ** -- ** -- -- -- * Model FS-3750 only ** These error messages are displayed if the relevant option is fitted. 2-27 2.15.
Setting the Audio Warning (Buzzer) The alarm will continue to sound while the error condition continues (if the printer is in the sleep mode, the alarm will be
silent for that period alone). The alarm will cease to sound, however, when the CANCEL key is pressed. To rectify the various error conditions listed above,
please refer to Chapter 5 of this manual, or to the operating manuals accompanying the various optional equipment. [ If you wish to cancel the data being
processed while the audio alarm is sounding, press the CANCEL key twice. Firstly, the audio alarm will be turned OFF, and then the data processing will be
[ After the audio alarm has been set to OFF, even if the PRESCRIBE 2e FRPO INIT command is executed, the printer will not return to the initial (ON) alarm
setting. To set the audio alarm to ON, reset using the mode selector menu from the control panel. 2-28 3.1. Internal Fonts Chapter 3 Fonts This chapter
changed from PCL 6 to another or vice versa.
can be adjusted in five steps fromýíì (light) toýíè (dark).
describes the types of fonts you can use with the printer, including the printer's internal fonts.
You're reading an excerpt. Click here to read official KYOCERA
FS-1750 user guide
http://somemanuals.com/dref/324820
canceled.