Installation Procedures - HP Console Management Controller User Manual

Installation Procedures

This section provides installation steps to install the CMC.
1. Attach the cord retention bracket to the CMC.
2. Install the sensors in the racks.
3. Connect the sensors to the CMC unit.
4. Connect the main input power cord to the CMC, or if an Uninterruptible
Power System (UPS) will be used for main power, connect the power
jumper cord to the CMC.
5. Connect the input power/voltage monitor cord to the CMC.
6. Connect jumper power cords to the fan assemblies.
7. Secure the cables to the cord retention bracket.
8. Mount the CMC in the rack.
9. Plug the input power cord to a UPS or AC power source.
10. Plug the fan input power cord to an AC source.
11. Secure the cables to the rack.
12. Power up the CMC.
13. Set the initial configuration using the front panel controls.
14. Insert the software CD.
Installation 2-7