Using The Front Serial Port; Installation Completion - HP Console Management Controller User Manual

Setting the Subnet Mask
I
Press Scroll Up
address. The default setting is 0.0.0.0.
I
The CMC will automatically reboot.
NOTE: For more detailed configuration instructions, see Chapter 4, "Software."

Using the Front Serial Port

The serial port on the front panel may be used with a laptop computer to
configure the CMC.
NOTE: For more detailed configuration instructions, see Chapter 4, "Software."
Figure 2-24. Connecting to the serial port

Installation Completion

Installation is now complete. For information on operating the CMC, see
Chapter 3, "Operation." Use the Compaq website at www.compaq.com as an
additional information source.
and Enter/Alarm Silence

Installation 2-25
to set the Subnet Mask