HP Console Management Controller User Manual page 79

Main Menu Items Submenu 1 Items
Values
Status
Network
configuration
IP configuration
Trap receiver
configuration
SNMP IP Access
Table 4-3
CMC Terminal Program Menus
Submenu 2 Items
IP Address
IP Subnetmask
IP Router
IP Trap receiver
Enable/Disable
IP Trap receiver
Enable/Disable
IP Trap receiver
Enable/Disable
IP Trap receiver
Enable/Disable
SNMP Manager
SNMP Manager
SNMP Manager
SNMP Manager
SNMP Manager
SNMP Manager
SNMP Manager
SNMP Manager
SNMP Manager
SNMP Manager
SNMP Manager
SNMP Manager
Software 4-29
Brief Description
Display rack information.
Display rack status.
Set network addresses.
Set up to 4 trap receiver IP
addresses. Trap receiver
number 1 is dedicated to
the Compaq Intelligent
Rack Manager software.
Any IP address entered in
number 1 will be over
written when used with the
software.
Set the authorized IP
addresses of the
management computers.
In the default setting (all
addresses set to 0.0.0.0),
all network IP addresses
are SNMP-authorized. If
one or more IP addresses
are entered, only those IP
addresses have SNMP
authorization. SNMP
communication with the
CMC can only be
established from this
system.
continued