Change Password Screen - HP Console Management Controller User Manual

Before pager alerts can be sent, configure the software to use the modem:
1. Enter the COM port to which the modem is connected in the
CommPort field.
2. Click Save to save the changes.
To add a phone number to the pager alert list:
1. Type a valid phone number for the pager and the Personal Identification
Number (PIN) in the Phone Numbers field. The format is
PHONE *PIN, where PHONE is the phone number for the pager and
PIN is the PIN number, for example, 18003451518 *1234.
2. Click Add to add the phone number to the list.
To remove a phone number from the pager alert list:
1. Highlight the phone number you want to remove.
2. Click Remove to remove the phone number from the list.

Change Password Screen

Figure 4-7. Change Password screen
Click the Change Password link to access the Change Password screen. Use
this screen to change the password used to log in to the software.
NOTE: The software allows only one user. The user is called Administrator.
Software 4-11