Device Configuration - HP Console Management Controller User Manual

4-12 Compaq Console Management Controller User Guide

Device Configuration

To change the password:
1. Type the old password in the Old Password field. If changing the
password for the first time, the old password is Administrator.
2. Type the new password in the New Password field. Passwords must
contain at least eight characters.
NOTE: Passwords can contain 8 to 20 characters. Passwords are case sensitive.
3. Retype the new password in the Retype New Password field.
4. Click Save to save the changes or click Cancel to cancel the changes.
To configure the individual CMC devices, click the Devices icon in the top
frame of the user interface. The IP addresses of all recognized CMCs display
in the left frame. Click the arrow next to each IP address for an expandable list
of available links for that CMC. The links to the device configuration pages
are as follows:
I
CMC Properties
I
Sensor Setup
I
Accessory Setup
I
Threshold Config
I
Alert Handling
I
Manual Control
I
Log
After a CMC is configured, each device configuration screen available for that
CMC is labeled with the CMC IP address, name, and physical location.