HP Console Management Controller User Manual

Compaq console management controller user guide
Table of Contents

Advertisement

Console Management Controller
User Guide
Second Edition (July 2001)
Part Number 218258-002
Compaq Computer Corporation

Advertisement

Table of Contents
loading

Summary of Contents for HP Console Management Controller

  • Page 1 Console Management Controller User Guide Second Edition (July 2001) Part Number 218258-002 Compaq Computer Corporation...
  • Page 2 Compaq’s or its service provider’s consent. Upon termination of the services, customer will, at Compaq’s or its service provider’s option, destroy or return the software and associated documentation in its possession. Compaq Console Management Controller User Guide Second Edition (July 2001) Part Number 218258-002...
  • Page 3: Table Of Contents

    Getting Help ...x Compaq Technical Support ...x Compaq Website...x Compaq Authorized Reseller...x Chapter Overview Compaq Console Management Controller... 1-2 General Description ... 1-2 Standard CMC Features... 1-3 Communications Ports... 1-4 Compaq Intelligent Rack Manager Lite... 1-4 Front Panel... 1-5 Front Panel Controls... 1-6 Front Panel LEDs ...
  • Page 4 Compaq Console Management Controller User Guide Installation Procedures... 2-7 Installing the Standard Sensors ... 2-8 Connecting the Cord Retention Bracket ... 2-17 Connecting the Sensors to the CMC ... 2-18 Connecting the Fan Assemblies... 2-19 Connecting the Input Power Cord to the CMC ... 2-20 Connecting the CMC to Utility Power...
  • Page 5 Change Password Screen... 4-11 Device Configuration... 4-12 CMC Properties Screen ... 4-13 Sensor Setup Screen ... 4-15 Accessory Setup Screen... 4-16 Threshold Configuration Screen... 4-18 Alert Handling Screen ... 4-19 Manual Control Screen... 4-20 Log Screen... 4-22 Device Monitoring... 4-22 Active Alarms Screen...
  • Page 6 Compaq Console Management Controller User Guide Appendix Electrostatic Discharge Grounding Methods ...B-2 Appendix Specifications Specifications...C-2 Appendix Pin Layout Configuration Compaq CMC ... D-1 Index...
  • Page 7: About This Guide

    This guide is designed to be used as step-by-step instructions for installation and as a reference for operation, troubleshooting, and future upgrades. Text Conventions This document uses the following conventions to distinguish elements of text: Keys USER INPUT FILENAMES Menu Options, Command Names, Dialog Box Names COMMANDS,...
  • Page 8: Symbols In Text

    Compaq Console Management Controller User Guide Symbols in Text These symbols may be found in the text of this guide. They have the following meanings. Symbols on Equipment These icons may be located on equipment in areas where hazardous conditions may exist.
  • Page 9: Rack Stability

    Important Safety Information Before installing this product, read the Important Safety Information guide provided in the Console Management Controller (CMC) Kit. Rack Stability WARNING: Make sure that the rack containing the CMC is stable. The following conditions must be met: The leveling feet are extended to the floor.
  • Page 10: Getting Help

    Compaq Console Management Controller User Guide Getting Help If you have a problem and have exhausted the information in this guide, you can get further information and other help in the following locations. Compaq Technical Support In North America, call the Compaq Technical Phone Support Center at 1-800-652-6672 (1-800-OK-COMPAQ) day, 7 days a week.
  • Page 11: Overview

    This chapter contains information on the following topics: Compaq Console Management Controller General description Standard CMC features Front panel Rear panel Chapter Overview...
  • Page 12: Compaq Console Management Controller

    1-2 Compaq Console Management Controller User Guide Compaq Console Management Controller The Console Management Controller (CMC) offers one model, part number 203039-B21. This unit is rack-mountable and is Worldwide voltage adaptable. General Description The CMC is a rack-mounted device intended to monitor and control the environment within a single-rack or multiple-rack suites.
  • Page 13: Standard Cmc Features

    Standard CMC Features 1U design Ethernet communications port for data exchange with a host computer Four analog inputs: Two temperature inputs One humidity input One voltage monitor for AC mains Two programmable fan output power controls Eight discrete inputs Four intrusion inputs One smoke input One mechanical shock/vibration input Two Auxiliary (AUX) inputs...
  • Page 14: Communications Ports

    1-4 Compaq Console Management Controller User Guide Communications Ports The communications port for data exchange with the host computer consists of an Ethernet port (RJ-45) using SNMP communication. The serial communication port (RJ-11) allows for the use of a VT- 100/Xmodem device.
  • Page 15: Front Panel

    Front Panel The CMC is rack-mountable in a 1U configuration. Figure 1-1. Front panel configuration Alarm LED Network LED Serial communication LED Serial communication port (RJ-11) Escape button Scroll up button Enter/Alarm silence button LCD display Power LED Power button Table 1-1 CMC Front Panel Overview 1-5...
  • Page 16: Front Panel Controls

    Front Panel Controls The CMC front panel includes the controls required to: Power the unit On or Off. Scroll through LCD menus. Select LCD menu items. Silence audible alarms and deactivate alarm relays (if these features are enabled in the control software). NOTE: For information about changing the configuration on the CMC, or to check the current configuration, see Chapter 4, “Software.”...
  • Page 17: Rear Panel

    Overview 1-7 Rear Panel The CMC features the following rear panel configuration: 9 11 13 10 12 Figure 1-2. Rear panel configuration...
  • Page 18 1-8 Compaq Console Management Controller User Guide Table 1-3 CMC Rear Panel Description Type of connector Main power input AC input (IEC 320-10A) Input voltage monitor / Power AC input (IEC 320-10A) input for Fan #1 and #2 Fan #1 Power output for fan #1 (IEC 320–10A)
  • Page 19: Installation

    This chapter provides information on the following topics: Installation requirements Installation procedures Powering on the CMC Completing the installation Chapter Installation...
  • Page 20: Installation Requirements

    2-2 Compaq Console Management Controller User Guide Installation Requirements This section lists items required to install the CMC. Items supplied with the basic CMC Kit The CMC Kit (Compaq Part Number 203039-B21) contains the following components: Hardware Figure 2-1. CMC kit contents (hardware)
  • Page 21 Software/Reference Material Important Safety Information guide to be reviewed before installing this product Power Products Documentation CD Compaq Intelligent Rack Manager Lite CD Compaq Console Management Controller User Guide Warranty information Voltage monitor cord/fan input cord (country-specific) Screws, washers and cage...
  • Page 22 2-4 Compaq Console Management Controller User Guide Optional Sensor Kit, with assorted cable lengths Compaq Part Number 203039-B22 Figure 2-2. Optional sensor kit content Temperature sensor Sensor cable Sensor cable Sensor cable Sensor cable Humidity sensor (sold separately) Humidity sensor bracket...
  • Page 23 Optional Smoke Sensor Kit Compaq Part Number 203039-B24 Figure 2-3. Optional smoke sensor kit contents Smoke sensor Sampling tube sections Tube couplings Optional Door Locking Kit Compaq Part Number 203039-B23 (sold separately) End cap Screws Sampling tube bracket (sold separately) Installation 2-5...
  • Page 24: Items Not Supplied With The Cmc Kit

    2-6 Compaq Console Management Controller User Guide Items not supplied with the CMC Kit Tools A medium flat-bladed screwdriver and a #2 Phillips screwdriver Cage nut-fitting tool (supplied with the Compaq rack) IMPORTANT: Only use the power cords supplied with the CMC. If the CMC does not include a power cord that is suitable for your application, contact an authorized Compaq service representative to obtain the appropriate power cord.
  • Page 25: Installation Procedures

    Installation Procedures This section provides installation steps to install the CMC. 1. Attach the cord retention bracket to the CMC. 2. Install the sensors in the racks. 3. Connect the sensors to the CMC unit. 4. Connect the main input power cord to the CMC, or if an Uninterruptible Power System (UPS) will be used for main power, connect the power jumper cord to the CMC.
  • Page 26: Installing The Standard Sensors

    2-8 Compaq Console Management Controller User Guide Installing the Standard Sensors The sensor cables may be routed through the rack and then attached to the rack by using the stick-on cable management clips or tie wraps. Temperature Sensor The temperature sensor can be installed on the ceiling of the rack, towards the rear, or near the most temperature-sensitive component in the rack.
  • Page 27 Intrusion Sensor Intrusion Sensor An intrusion sensor consists of two parts: A magnet An electrical switch 1. The magnet should be installed on the inside of the rack door and the electrical switch on the rack as shown in the following instructions. Make sure the magnet and switch align with each other and allow sufficient clearance for the doors to close.
  • Page 28 2-10 Compaq Console Management Controller User Guide Figure 2-6. Installing the intrusion sensor in the 7000 series rack To connect a series of intrusion sensors to the same CMC port, remove the plug shipped in the sensor and connect the cable from an additional intrusion sensor, as shown below.
  • Page 29 Installing the Optional Sensors Temperature sensor The optional temperature sensor should be installed on the ceiling of the second rack, towards the rear. (See Figure 2-4) Intrusion sensor The optional intrusion sensors should be mounted on the doors of the second rack.
  • Page 30 2-12 Compaq Console Management Controller User Guide Humidity sensor Figure 2-8. Installing the humidity sensor in the 9000 series rack Figure 2-9. Installing the humidity sensor in the 7000 series rack The optional humidity sensor should be installed as follows: a.
  • Page 31 Mechanical shock/vibration sensor Install the optional mechanical shock/vibration sensor on the rails of the rack as follows: Figure 2-10. Installing the vibration sensor in the 9000 rack Figure 2-11. Installing the vibration sensor in the 7000 rack Installation 2-13...
  • Page 32 2-14 Compaq Console Management Controller User Guide Smoke sensor kit Figure 2-12. Installing the smoke sensor Install the optional smoke sensor as follows: a. Place the smoke sensor on rear rack door. Then place the screws with washers through the holes in the door and secure the sensor.
  • Page 33 g. Route the sensor cable through the rack. h. Attach the cable to the rack with the stick-on cable retention clips or tie wraps included in the CMC basic unit. i. Connect the cable to the sensor Figure 2-13. Connecting the smoke sensor Smoke Sensor Operation NOTE: The smoke sensor is for use only with the CMC and is not suitable for connection to building fire alarm systems.
  • Page 34 2-16 Compaq Console Management Controller User Guide Smoke Sensor Maintenance Keep the sampling tube and holes clean and clear of dust and debris at all times. Check the smoke sensor at least once per year. Use smoke test gas to check and verify proper unit functionality.
  • Page 35: Connecting The Cord Retention Bracket

    Installation 2-17 Connecting the Cord Retention Bracket Remove the screws from the rear of the CMC. Align cord retention bracket with the holes in the rear of the unit and insert screws Figure 2-14. Connecting the cord retention bracket...
  • Page 36: Connecting The Sensors To The Cmc

    2-18 Compaq Console Management Controller User Guide Connecting the Sensors to the CMC The sensors connect to the rear of the CMC. See Table 1-4, for a description of the rear connectors. 9 11 13 10 12 Figure 2-15. CMC rear panel...
  • Page 37: Connecting The Fan Assemblies

    Installation 2-19 Connecting the Fan Assemblies The fan assemblies should be connected to the fan power output sockets a nd . The input power/voltage monitoring cord should be connected to the input power plug . The cable is connecting the rack fan array in the second rack.
  • Page 38: Connecting The Input Power Cord To The Cmc

    2-20 Compaq Console Management Controller User Guide Connecting the Input Power Cord to the CMC Make sure the Power button is in the Off position before connecting the input power cord to the rear of the unit. Figure 2-17. Power Button Connect the input power cord to the input power socket Figure 2-18.
  • Page 39: Connecting The Cmc To Utility Power

    Connecting the CMC to Utility Power If a UPS is installed in the rack, connect the CMC to the UPS. If a UPS is not installed in the rack, use a grounded utility power outlet. The power for the fan outputs comes from the voltage monitor input. If the rack configuration includes fans, the rack fans must be powered from the fan power output sockets.
  • Page 40: Connecting The Network Cable

    2-22 Compaq Console Management Controller User Guide Connecting the Network Cable Connect the network cable to the RJ-45 socket. Figure 2-19. Connecting the network cable Securing Cables to the CMC Use the tie wraps (included with the CMC Kit) to secure the cables to the cable retention bracket.
  • Page 41: Mounting The Cmc In The Rack

    Mounting the CMC in the Rack The CMC mounts directly to the rack in a 1U configuration. Refer to the Compaq Console Management Controller Installation Instructions (supplied with the CMC Kit) for directions. Figure 2-21. Mounting the unit in the rack...
  • Page 42: Configuring The Cmc

    2-24 Compaq Console Management Controller User Guide Configuring the CMC Use the front panel for basic configuration of the unit. The CMC is fully localized to allow for complete functionality of the front panel in multiple languages. Figure 2-23. CMC front panel Selecting the Language Use the CMC front panel controls to select the appropriate language.
  • Page 43: Using The Front Serial Port

    Setting the Subnet Mask Press Scroll Up address. The default setting is 0.0.0.0. The CMC will automatically reboot. NOTE: For more detailed configuration instructions, see Chapter 4, “Software.” Using the Front Serial Port The serial port on the front panel may be used with a laptop computer to configure the CMC.
  • Page 44: Operation

    This chapter contains information on the following topics: LCD menu Alert handling Chapter Operation...
  • Page 45: Lcd Menu

    3-2 Compaq Console Management Controller User Guide LCD Menu Figure 3-1. LCD menu and control buttons From the LCD menu , access information on Status, System Information, and Setup.
  • Page 46: Status Menu

    Status Menu 1. Press Enter/Alarm Silence 2. Press Enter/Alarm Silence 3. Press Scroll Up Temperature 1 Temperature 2 Fan 1 Fan 2 Voltage Humidity Door/Panel 1 Door/Panel 2 Door/Panel 3 Door/Panel 4 Lock Set 1 Lock Set 2 Locking dev. 1 Locking dev.
  • Page 47: System Information Menu

    3-4 Compaq Console Management Controller User Guide System Information Menu See Figure 3-1, for a description of the LCD menu. 1. Press Scroll Up 2. Press Enter/Alarm Silence 3. Press Scroll Up 4. Press Escape one time to access the System Information menu.
  • Page 48: Setup Menu

    Setup Menu See Figure 3-1, for a description of the LCD menu. 1. Press Scroll Up 2. Press Enter/Alarm Silence 3. Press Scroll Up Threshold fan 1 Threshold fan 2 Language Temperature unit IP address IP mask IP router Password - Enable/Disable 4.
  • Page 49: Alert Handling

    3-6 Compaq Console Management Controller User Guide Alert Handling An alert triggers an action as configured in the software. Possible actions, based on an alert, are identified below. Each alert can trigger any or all of these actions. Examples: Audible alarm...
  • Page 50: Silencing An Audible Alarm

    Silencing an Audible Alarm To silence an audible alarm, press Enter/Alarm Silence disable the silencing feature in the software for all CMC alerts to ensure that an unauthorized individual cannot turn off an audible alarm. Figure 3-2. The Enter/Alarm Silence button IMPORTANT Pressing the Enter/Alarm Silence button quiets the alarm, but does not clear the condition that originally initiated the alarm.
  • Page 51: Software

    This chapter describes the management of rack environments using Compaq CMCs that are controlled using Compaq Intelligent Rack Manager Lite software. Compaq Intelligent Rack Manager Lite Software Compaq Intelligent Rack Manager Lite software is a Java-based application that runs a web server. Intelligent Rack Manager Lite ensures maximum reliability of Compaq computer systems through flexible and comprehensive remote monitoring of rack environments using Compaq CMCs.
  • Page 52: System Requirements

    4-2 Compaq Console Management Controller User Guide System Requirements Intelligent Rack Manager Lite software requires the following minimum hardware and software: Preinstallation Tasks Use the CMC front panel controls to perform the following tasks before beginning the software installation: 100-MHz Pentium computer...
  • Page 53: Software Installation

    Software Installation The Intelligent Rack Manager Lite software CD is provided in the CMC kit. NOTE: To install the Intelligent Rack Manager Lite software, you must have Administrator rights. To install the software using this CD: 1. Insert the CD into the CD-ROM drive of any network-connected computer.
  • Page 54: Uninstalling The Software

    4-4 Compaq Console Management Controller User Guide Uninstalling the Software To remove the Intelligent Rack Manager Lite software from the system: 1. Select Start, Programs. 2. Select the Compaq Intelligent Rack Manager Lite program group. 3. Select Uninstall. The software uninstalls.
  • Page 55: Logging In To The Software

    Logging In to the Software Figure 4-1. Login screen Before using the Intelligent Rack Manager Lite software, you must log in with a username and password. The first time you log in, enter Administrator as the username and Administrator as the password. Click Enter Password to log in.
  • Page 56: Software Settings

    4-6 Compaq Console Management Controller User Guide The Intelligent Rack Manager Lite software interface is divided into three frames: Software Settings To configure the software, click the Settings icon in the top frame of the interface. A list of links to software setup pages displays in the left frame: Each software settings screen is labeled Software Settings.
  • Page 57: Add/Remove Device Screen

    Add/Remove Device Screen Figure 4-3. Add/Remove Device screen Click the Add/Remove Device link to access the Add/Remove Device screen. The Intelligent Rack Manager Lite software only recognizes CMC devices that are listed on the Add/Remove Device screen. To add a CMC to the software: 1.
  • Page 58: Messaging Setup Screen

    4-8 Compaq Console Management Controller User Guide Messaging Setup Screen Figure 4-4. Messaging Setup screen Click the Messaging Setup link to access the Messaging Setup screen. Use this screen to set the computer names to which popup messages can be sent when CMC alerts occur.
  • Page 59: Email Setup Screen

    Email Setup Screen Figure 4-5. Email Setup screen Click the Email Setup link to access the Email Setup screen. Use this screen to set the email addresses to which email messages can be sent when CMC alerts occur. NOTE: The added email addresses become available on the Alert Handling screen, where each address must be configured to receive specific alerts.
  • Page 60: Pager Setup Screen

    4-10 Compaq Console Management Controller User Guide To add an address to the email alert list: 1. Type a user’s valid email address in the Email Addresses field. 2. Click Add to add the address to the list. To remove an address from the email alert list: 1.
  • Page 61: Change Password Screen

    Before pager alerts can be sent, configure the software to use the modem: 1. Enter the COM port to which the modem is connected in the CommPort field. 2. Click Save to save the changes. To add a phone number to the pager alert list: 1.
  • Page 62: Device Configuration

    4-12 Compaq Console Management Controller User Guide To change the password: 1. Type the old password in the Old Password field. If changing the 2. Type the new password in the New Password field. Passwords must 3. Retype the new password in the Retype New Password field.
  • Page 63: Cmc Properties Screen

    Software 4-13 CMC Properties Screen Figure 4-8. CMC Properties screen Click the CMC Properties link to access the CMC Properties screen. Use this screen to configure the CMC properties for each CMC recognized by the Intelligent Rack Manager Lite software. The CMC hardware, software, firmware, and MIB version levels are indicated in the Device Information box.
  • Page 64 4-14 Compaq Console Management Controller User Guide To configure a CMC: 1. Enter the name, physical location, and contact person for the CMC in 2. Select the appropriate display language and temperature unit of measure. 3. Select the audible alarm Off radio button to permanently turn off the 4.
  • Page 65: Sensor Setup Screen

    Software 4-15 Sensor Setup Screen Figure 4-9. Sensor Setup screen...
  • Page 66 4-16 Compaq Console Management Controller User Guide Click the Sensor Setup link to access the Sensor Setup screen. Use this screen to configure the sensors. To configure the sensors: 1. Select the Not Available radio button for each sensor that is listed as 2.
  • Page 67: Accessory Setup Screen

    Software 4-17 Accessory Setup Screen Figure 4-10. Accessory Setup screen Click the Accessory Setup link to access the Accessory Setup screen. Use this screen to configure the CMC options.
  • Page 68 4-18 Compaq Console Management Controller User Guide To configure the options: 1. Select whether each fan is installed (available) or not installed 2. Select the appropriate logic for the alarm relays. 3. Enable the Press 4. Select the appropriate options for each lock set.
  • Page 69: Threshold Configuration Screen

    Threshold Configuration Screen Figure 4-11. Threshold Configuration screen Click the Threshold Config link to access the Threshold Configuration screen. Use this screen to modify the minimum and maximum acceptable values for temperature, humidity, and voltage. To modify the values: 1. Enter the minimum and maximum temperature, humidity, and voltage values.
  • Page 70: Alert Handling Screen

    4-20 Compaq Console Management Controller User Guide 4. After entering the threshold information, click Save to save the changes 5. Click Return to view the Device Home screen for this CMC. The Alert Handling Screen Figure 4-12. Alert Handling screen Click the Alert Handling link to access the Alert Handling screen.
  • Page 71: Manual Control Screen

    4. Repeat steps 1 through 3 for each alert situation in the pull-down menu. 5. Click Return to view the Device Home screen for this CMC. The Device Home screen is discussed in detail later in this chapter. NOTE: Computer names, email addresses, and phone numbers that display on the Alert Handling screen can be set using the software settings screens.
  • Page 72 4-22 Compaq Console Management Controller User Guide To manually control the behaviors: 1. Select the appropriate radio button to manually turn fans on or off. 2. Lock a door that is unlocked or unlock a door that is locked. Doors can 3.
  • Page 73: Log Screen

    Log Screen Figure 4-14. Log screen Click the Log link to access the Log screen. Use this screen to view information about alerts issued for the CMC. Click Clear to clear all entries in the log. Click Return to view the Device Home screen for this CMC. Click Print on the browser window to print the log.
  • Page 74: Active Alarms Screen

    4-24 Compaq Console Management Controller User Guide Active Alarms Screen Figure 4-15. Active Alarms screen Click the Devices icon, then click the CMC Devices heading in the left frame to access the Active Alarms screen. The Active Alarms screen automatically displays each time you log in to the software.
  • Page 75: Device Home Screen

    Device Home Screen Figure 4-16. Device Home screen The Device Home screen can be accessed by: Clicking an IP address in the Active Alerts screen status list. Clicking the IP address of a CMC in the left frame of the software interface.
  • Page 76 4-26 Compaq Console Management Controller User Guide Symbol Temperature, humidity, and voltage information in numerical and graphical form, including an indication of whether the temperature is in a safe range: White—Safe range Yellow—Warning Red—Critical Gray—No sensor Component status information. Table 4-2 lists the meanings of the status symbols used on the Device Home screen.
  • Page 77: Terminal Program Operation

    Terminal Program Operation Much of the Intelligent Rack Manager Lite software functionality is available in a simpler, text-based interface using a host computer and a terminal program over a serial connection to the CMC. See “Configuring the CMC” in Chapter 2 of this guide for more information on connecting the CMC to a host computer.
  • Page 78: Navigating Menus

    4-28 Compaq Console Management Controller User Guide 4. Set up the properties for your terminal connection: 5. The main menu of the CMC displays on the HyperTerminal interface. Navigating Menus Use Table 4-3 as a reference when navigating the CMC menus.
  • Page 79 CMC Terminal Program Menus Main Menu Items Submenu 1 Items Values Status Network configuration IP configuration Trap receiver configuration SNMP IP Access Table 4-3 Submenu 2 Items Brief Description Display rack information. Display rack status. IP Address Set network addresses. IP Subnetmask IP Router Set up to 4 trap receiver IP...
  • Page 80 4-30 Compaq Console Management Controller User Guide Table 4-3 CMC Terminal Program Menus Main Menu Items Network configuration (continued) General setup Setup Detectors (Analog/Fans) continued Submenu 1 Items Submenu 2 Items Enable TFTP Enable Auth. Traps Read Community Write Community...
  • Page 81 Table 4-3 CMC Terminal Program Menus Main Menu Items Submenu 1 Items Setup Detectors (Digital) Input 1 Input 2 Input 3 Input 4 Smoke sensor Shock sensor continued Submenu 2 Items Available Description Fan option Shock option Available Description Fan option Shock option Available Description...
  • Page 82 4-32 Compaq Console Management Controller User Guide Table 4-3 CMC Terminal Program Menus Main Menu Items Setup Detectors (Digital) (continued) Thresholds continued Submenu 1 Items Submenu 2 Items Aux 1 Available Description Logic Aux 2 Available Description Logic Warning temp.1 Max.temp.1...
  • Page 83 Table 4-3 CMC Terminal Program Menus Main Menu Items Submenu 1 Items Alert handling Temperature 1 Temperature 2 Fan 1 Fan 2 Voltage Humidity continued Submenu 2 Items Alarm relays max Alarm relays warning Alarm relays min Audible Alarm max Audible Alarm warning Audible Alarm min Alarm relays max...
  • Page 84 4-34 Compaq Console Management Controller User Guide Table 4-3 CMC Terminal Program Menus Main Menu Items Alert handling (continued) System Info Defaults continued Submenu 1 Items Submenu 2 Items Aux 1 Alarm relays Audible Alarm Aux 2 Alarm relays Audible Alarm...
  • Page 85: Troubleshooting

    This chapter provides information on the following topics: Troubleshooting during startup Troubleshooting after startup Repairing the CMC Chapter Troubleshooting...
  • Page 86: Troubleshooting During Startup

    5-2 Compaq Console Management Controller User Guide Troubleshooting During Startup If problems occur when starting the Compaq CMC, select the appropriate symptom for possible causes and actions. Description of Fault Symptom The CMC fails to function after power up. Connected sensors are not recognized by the CMC.
  • Page 87: Troubleshooting After Startup

    Troubleshooting After Startup For problems that occur after the CMC started, these suggested actions address possible causes. Symptom Audible Alarm Repairing the CMC Repairs to the CMC must be carried out by Compaq or a Compaq authorized service representative. The only user-serviceable parts are the fuses located in the rear of the unit.
  • Page 88: Appendix

    Regulatory Compliance Identification Numbers For the purpose of regulatory compliance certifications and identification, the Compaq CMC model is assigned a Compaq Series Number. The Compaq Series Number for this product is shown in the following table. The CMC Series Number can be found on the Regulatory Compliance label, along with the required approval markings and information.
  • Page 89: Federal Communications Commission Notice

    A-2 Compaq Console Management Controller User Guide Federal Communications Commission Notice Part 15 of the Federal Communications Commission (FCC) Rules and Regulations has established Radio Frequency (RF) emission limits to provide an interference-free radio frequency spectrum. Many electronic devices, including computers, generate RF energy incidental to their intended function and are, therefore, covered by these rules.
  • Page 90: Class B Equipment

    Class B Equipment This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 91: Modifications

    A-4 Compaq Console Management Controller User Guide Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Compaq Computer Corporation may void the user's authority to operate the equipment.
  • Page 92: European Union Notice

    European Union Notice Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms (in brackets are the equivalent international standards): EN50091-1 –...
  • Page 93: Electrostatic Discharge

    To prevent damaging the system, be aware of the precautions you need to follow when setting up the system or handling parts. A discharge of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the device.
  • Page 94: Grounding Methods

    B-2 Compaq Console Management Controller User Guide Grounding Methods There are several methods for grounding. Use one or more of the following methods when handling or installing electrostatic-sensitive parts: If you do not have any of the suggested equipment for proper grounding, have a Compaq authorized reseller install the part.
  • Page 95: Specifications

    This appendix provides specifications that apply to the Compaq CMC: Physical specifications Environmental specifications Input/Output specifications Appendix Specifications...
  • Page 96 C-2 Compaq Console Management Controller User Guide Specifications Dimensions Operating temperature Storage temperature Processor Program memory CMC Rated voltage CMC Maximum input current rating Voltage drop time Rated voltage for fan inlet/outlets Maximum current rating for fans Table C-1 Specifications – Console Management Controller (CMC)
  • Page 97 Table C-1 Specifications – Console Management Controller (CMC) Feature Serial interface RS-232 Ethernet connection 10BaseT, IEEE 802.3 (10 MB/sec), TCP/IP, SNMP, TFTP Fuses Main AC input power-250V, 800mA, T, IEC-127 Fan #1 switched power-250V, 2A, T, IEC-127 Fan #2 switched power-250V, 2A, T, IEC-127 Alarm relays 1 and 2 Contacts: S.P.D.T., 800 mA @ 24VDC...
  • Page 98 Appendix Pin Layout Configuration Compaq CMC The RJ-12 connector pins on the rear of the CMC are identified in the following figure. The RJ-12 pin functions are described in Table D-1. Figure D-1. RJ-12 ports...
  • Page 99 D-2 Compaq Console Management Controller Alarm Relay Wiring Examples Figure D-2. Alarm relay wiring examples...
  • Page 100 Temperature Humidity sensor sensor Sensor Humidity signal (4mA to 20mA) Sensor Ground (4mA to 20mA) Ground 24VDC, 44mA Note: 1. The alarm relay contacts are rated for a maximum of 24VDC and 800mA, when connecting to an external power source. 2.
  • Page 101 accessing HyperTerminal 4-26 LCD menu items 3-2 software 4-4 Accessory Setup screen 4-16 Active Alarms screen 4-23 Add/Remove Device screen 4-7 adding addresses for email alerts 4-10 CMCs to software 4-7 computer names for popup alerts 4-8 phone numbers for pager alerts 4-11 address, IP 3-5 Alarm LED 1-5, 1-6...
  • Page 102 2 Compaq Console Management Controller User Guide CD, software 4-3 CE Marking A-5 Change Password screen 4-11 CMC See Console Management Controller CMC Properties screen 4-13 Comm Port See communications port communications port features 1-4 overview 1-4 community strings 4-14...
  • Page 103 passwords 3-5, 4-14 shock sensors 4-15 Enter/Alarm Silence button 1-5 Escape button 1-5 Ethernet connection C-3 European Union Notice A-5 example, alert handling 3-6 extension cables 2-21 fans availability 4-17 connecting 2-19 controlling manually 4-20 maximum current rating C-2 power 2-21 setting up 3-5, 4-17 status 3-3, 4-24 features...
  • Page 104 4 Compaq Console Management Controller User Guide procedures 2-7 requirements 2-2 tools needed 2-6 installing CMCs 2-7 humidity sensor 2-12 intrusion sensors 2-9 optional sensors 2-11 sensors 2-8 shock sensor 2-13 smoke sensors 2-14 software 4-3 temperature sensors 2-8 Intelligent Rack Manager Lite See...
  • Page 105 messages email alert 4-9 pager alert 4-10 popup alert 4-8 Messaging Setup screen 4-8 file 4-1 version 3-4, 4-13 modem, configuring 4-11 modifying accessory setup 4-16 alert handling 3-6, 4-19 CMC properties 4-13 menu values 3-5 sensor setup 4-15 threshold values 4-18 monitoring CMC devices 4-22 mounting CMCs 2-23 name...
  • Page 106 6 Compaq Console Management Controller User Guide rack mounting CMCs 2-23 stability ix RAM C-2 rated voltage C-2 Read/Write Community strings 4-14 rear panel 2-18 recognized CMCs 4-7 reference material 2-3 Regulatory Compliance identification A-1 location of label A-1 series numbers A-1...
  • Page 107 IP address 2-24, 3-5 IP mask 3-5 IP router 3-5 language 2-24, 3-5 subnet mask 2-25 setting up accessories 4-16 alarm relays 4-17 alerts 3-6, 4-19 email alerts 4-9 fans 3-5, 4-17 mail system 4-9 manual control 4-20 pager alerts 4-10 popup alerts 4-8 sensors 4-15 software 4-6...
  • Page 108 8 Compaq Console Management Controller User Guide status 3-3, 4-25 storage C-2 threshold settings 4-18 unit of measure 3-5, 4-14 terminal operation 4-26 text conventions vii Threshold Configuration screen 4-18 time operating 3-4 system 3-4 tools 2-6 troubleshooting after start 5-1, 5-3...

This manual is also suitable for:

203039-b21 - console management controller

Table of Contents