HP Vectra VE5 4 Installation Manual
Network interface card (10bt)
Hide thumbs
Also See for Vectra VE5 4:
- User manual (110 pages) ,
- Technical reference manual (70 pages) ,
- Supplementary manual (10 pages)
Related Manuals for HP Vectra VE5 4
Summary of Contents for HP Vectra VE5 4
- Page 1 Etherlink IIIB ISA Network Interface Card (10BT) 3C509B-TP Installation Guide...
- Page 2 Hewlett-Packard Company. Microsoft®, Windows® and MS-DOS® are registered trademarks of Microsoft Corporation. is a trademark of Intel Corporation. Pentium® is a registered trademark of Intel Corporation. Hewlett-Packard France Commercial Desktop Computing Division 38053 Grenoble Cedex 9 France...
- Page 3 • Plug and Play Compatibility • Full Duplex Procedure 1 With the HP Vectra turned off install the 3COM Etherlink III 3C509-B adapter card into an ISA slot. 2 Power on the machine and allow it to boot to a DOS prompt.
- Page 4 1 Connecting to a Netware 3.12 Server Windows for Workgroups 6 Remove the 3com cards driver diskette and insert Netware client for DOS and MS-Windows disk 1. 7 Execute INSTALL.EXE and set lines 1-5 as listed below; 8 C:\NWCLIENT 9 YES 10 YES C:\WINDOWS 11 NO...
- Page 5 • Plug and Play Compatibility • Full Duplex Procedure 1 With the HP Vectra turned off install the 3COM Etherlink III 3C509-B adapter card into an ISA slot. 2 Power on the machine and restart Windows 95 SR2 in MS-DOS Mode.
- Page 6 1 Connecting to a Netware 3.12 Server Windows 95 SR2 9 Choose to add an adapter, click on “Add” then on “Have Disk.” 10 Insert the 3C509B drivers diskette and set path to “A:\” and hit enter. (If you have a Hewlett-Packard pre-loaded HDD, set the path statement to “C:\LANDRV\3C509B\WIN95\”) 11 High light the adapter labeled “3Com Etherlink III ISA (3C509/3C509B) in ISA Mode”...
- Page 7 • Plug and Play Compatibility • Full Duplex Procedure 1 With the HP Vectra turned off install the 3COM Etherlink III 3C509-B adapter card into an ISA slot. 2 Power on the machine and allow it to boot to a DOS prompt.
- Page 8 2 Connecting to a Netware 4.11 Server Windows for Workgroups 6 Remove the 3com cards driver diskette and insert Netware client for DOS and MS-Windows disk 1. 7 Execute INSTALL.EXE and set lines 1-5 as listed below; 8 C:\NWCLIENT 9 YES 10 YES C:\WINDOWS 11 NO...
- Page 9 • Plug and Play Compatibility • Full Duplex Procedure 1 With the HP Vectra turned off install the 3COM Etherlink III 3C509-B adapter card into an ISA slot. 2 Power on the machine and restart Windows 95 SR2 in MS-DOS Mode.
- Page 10 2 Connecting to a Netware 4.11 Server Windows 95 SR2 9 Choose to add an adapter, click on “Add” then on “Have Disk.” 10 Insert the 3C509B drivers diskette and set path to “A:\” and hit enter. (If you have a Hewlett-Packard pre-loaded HDD, set the path statement to “C:\LANDRV\3C509B\WIN95\”) 11 High light the adapter labeled “3Com Etherlink III ISA (3C509/3C509B) in ISA Mode”...
- Page 11 • Plug and Play Compatibility • Full Duplex Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink III 3C509-B adapter card into an ISA slot. 2 Connect network Cable Media to the 3COM 3C509B card. 3 After booting to DOS, insert the 3COM’s drivers disk “Etherlink 3C509-B Ethernet ver.
- Page 12 12 Type the path “A:\WFW311” in the “Install Driver” dialog box, and then insert the 3COM 3C509 drivers disk into the floppy drive, and click “OK.” (If you have an HP preloaded HDD, set path to “C:\LANDRV\3C509B\WFW311”) 13 Select “3Com Etherlink III (3C5X9)” in the “Unlisted or Updated Network Adapter”...
- Page 13 3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11...
- Page 14 3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11...
- Page 15 • Plug and Play Compatibility • Full Duplex Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink III 3C509-B adapter card into an ISA slot. 2 Connect network cable media to the 3COM 3C509B card. 3 Insert a DOS bootable diskette and power on the machine.
- Page 16 14 With the Path set to “A:\” in the “Install From Disk” dialog box click “OK”. (If you have an HP pre-loaded HDD, set the path statement to “C:\LANDRV\3C509B\”) 15 Select the “3Com Etherlink III ISA (3C509/3C509B) in ISA mode” and click “OK.”...
- Page 17 • Plug and Play Compatibility • Full Duplex Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink III 3C509-B adapter card into an ISA slot. 2 Connect network cable media to the 3COM 3C509B card. 3 Insert a DOS bootable diskette and power on the machine.
- Page 18 14 Set the path to “A:\” in the “Insert Disk“ dialog box, and then insert the 3COM 3C509 drivers disk. 15 Click “OK” at the “Install Driver” dialog box. (If you have an HP preloaded HDD, set path to “C:\LANDRV\3C509\) 16 Select “3Com Etherlink III (3C509) ISA Adapter”...
- Page 19 3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 24 To complete the installation, remove the floppy disk , and click on “Restart Computer” button in the “Windows NT Workstation Networking Setup” dialog box.
- Page 20 3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51...
- Page 21 • Plug and Play Compatibility • Full Duplex Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink III 3C509-B adapter card into an ISA slot. 2 Connect network media to the 3COM 3C509B card. 3 Insert a DOS bootable diskette and power on the machine.
- Page 22 3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 8 Power on the machine and allow it to boot to Windows NT Workstation 4.0. 9 Log onto the machine with administrator privileges. (If you do not have the required information, contact your network administrator) 10 Open the “Network Properties”...
- Page 23 26 Specify your Computer Name, Workgroup or Domain and click on “Next.” (If you do not have the required information, contact your network administrator) 27 After “Network has been installed on this computer” click on “Finish. 28 To complete the installation, select “Yes” to reboot your computer. 3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0...
- Page 24 3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0...
- Page 25 • Plug and Play Compatibility • Full Duplex Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink III 3C509-B adapter card into an ISA slot. 2 Connect network Cable Media to the 3COM 3C509B card. 3 After booting to DOS, insert the 3COM’s drivers disk “Etherlink 3C509-B Ethernet ver.
- Page 26 12 Type the path “A:\WFW311” in the “Install Driver” dialog box, and then insert the 3COM 3C509 drivers disk into the floppy drive, and click “OK.” (If you have an HP preloaded HDD, set path to “C:\LANDRV\3C509B\WFW311”) 13 Select “3Com Etherlink III (3C5X9)” in the “Unlisted or Updated Network Adapter”...
- Page 27 4. Connecting to a Windows NT Server 4.0 Windows for Workgroups Ver. 3.11...
- Page 28 4. Connecting to a Windows NT Server 4.0 Windows for Workgroups Ver. 3.11...
- Page 29 • Plug and Play Compatibility • Full Duplex Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink III 3C509-B adapter card into an ISA slot. 2 Connect network cable media to the 3COM 3C509B card. 3 Insert a DOS bootable diskette and power on the machine.
- Page 30 14 With the Path set to “A:\” in the “Install From Disk” dialog box click “OK”. (If you have an HP pre-loaded HDD, set the path statement to “C:\LANDRV\3C509B\”) 15 Select the “3Com Etherlink III ISA (3C509/3C509B) in ISA mode” and click “OK.”...
- Page 31 • Plug and Play Compatibility • Full Duple Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink III 3C509-B adapter card into an ISA slot. 2 Connect network cable media to the 3COM 3C509B card. 3 Insert a DOS bootable diskette and power on the machine.
- Page 32 14 Set the path to “A:\” in the “Insert Disk“ dialog box, and then insert the 3COM 3C509 drivers disk. 15 Click “OK” at the “Install Driver” dialog box. (If you have an HP preloaded HDD, set path to “C:\LANDRV\3C509\) 16 Select “3Com Etherlink III (3C509) ISA Adapter”...
- Page 33 4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 24 To complete the installation, remove the floppy disk , and click on “Restart Computer” button in the “Windows NT Workstation Networking Setup” dialog box.
- Page 34 4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51...
- Page 35 • Plug and Play Compatibility • Full Duplex Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink III 3C509-B adapter card into an ISA slot. 2 Connect network media to the 3COM 3C509B card. 3 Insert a DOS bootable diskette and power on the machine.
- Page 36 4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 8 Power on the machine and allow it to boot to Windows NT Workstation 4.0. 9 Log onto the machine with administrator privileges. (If you do not have the required information, contact your network administrator) 10 Open the “Network Properties”...
- Page 37 26 Specify your Computer Name, Workgroup or Domain and click on “Next.” (If you do not have the required information, contact your network administrator) 27 After “Network has been installed on this computer” click on “Finish. 28 To complete the installation, select “Yes” to reboot your computer. 4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0...
- Page 38 4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0...
- Page 40 Version Number Lans PCI Rev.1...