HP Console Management Controller User Manual page 80

4-30 Compaq Console Management Controller User Guide
Table 4-3
CMC Terminal Program Menus
Main Menu Items
Network
configuration
(continued)
General setup
Setup Detectors
(Analog/Fans)
continued
Submenu 1 Items
Enable TFTP
Enable Auth. Traps
Read Community
Write Community
System Name
System Contact
System Location
Change Password
Enable Password
Activate actual values
Language
Temperature unit
Audible Alarm
Quit Alarm relay 1
Quit Alarm relay 2
Logic Alarm relay 1
Logic Alarm relay 2
Set date of internal clock
Set time of internal clock
Temperature 1 available
Temperature 2 available
Fan1 available
Fan2 available
Voltage available
Humidity available
Submenu 2 Items Brief Description
Set network properties. All
configuration changes are
retained in CMC memory.
Changing the Read or
Write Community strings
independent of the
software prevents the
software from being able
to control the CMC. If
Enable TFTP is disabled,
the Compaq Intelligent
Rack Manager software
will not be able to perform
firmware upgrades.
Configure general CMC
properties.
Set up sensors.
continued