Avaya one-X 9600 Series Installation And Maintenance Manual page 18

9600 Series SIP IP Telephone Installation
Note:
For information about the SIG parameter, see "Choosing the Right Application
Note:
File and Upgrade Script File" in the Avaya one-X™ Deskphone Edition for 9600
Series SIP IP Telephones Administrator Guide. For information on setting or
changing the SIG parameter, see
Table 1: H.323 to SIP and SIP to H.323 Conversion Chart
To convert this
type of
Environment telephone
SIP-centric H.323 factory set
SIP-centric H.323 in use
SIP-centric SIP
H.323-centric H.323 in use
H.323-centric H.323 factory set
18 9600 Series SIP IP Telephones Release 2.4 Installation and Maintenance Guide
Signaling Protocol Identifier
To this
type of
telephone Then:
SIP No action is required because the Signaling
Protocol Identifier (SIG) defaults to SIP. Upon
power-up & network connection, the telephone
automatically downloads the proper SIP files.
SIP Perform the SIG Craft procedure to change the
SIG parameter value from "1" (H323) to "default"
(SIP). For information, see
Identifier
Save the SIG parameter change. Restart the
telephone as covered in
page 45.
H.323 Perform the SIG Craft procedure to change the
SIG parameter value from "default" to "1" (H323).
For information, see
Identifier
Save the SIG parameter change. Restart the
telephone as covered in
page 45.
SIP Perform the SIG Craft procedure to change the
SIG parameter value from "default" to "2" (SIP)."
For information, see
Identifier
Save the SIG parameter change. Restart the
telephone as covered in
page 45.
SIP Connect the telephone to a power source and to
the network.
Press the Program softkey as soon as it displays
in the first softkey position to access the Craft
Access Code Entry screen. Perform the SIG
Craft procedure and change the value from
"default" to "2" (SIP).
Save the SIG parameter change. Restart the
telephone as covered in
page 45.
on page 45.
Signaling Protocol
on page 45.
Restart the Telephone
Signaling Protocol
on page 45.
Restart the Telephone
Signaling Protocol
on page 45.
Restart the Telephone
Restart the Telephone
on
on
on
on