Touchpad Button Board - HP PAVILION G6 Maintenance And Service Manual

TouchPad button board

Description
TouchPad button board (includes bracket and cable)
Before removing the TouchPad button board, remove the following components:
1. Battery (see
2. Service access cover (see
3. Hard drive (see
4. Optical drive (see
5. Keyboard (see
6. Top cover (see
Remove the TouchPad button board:
1. Release the zero insertion force (ZIF) connector (1) to which the TouchPad button board cable is
attached, and then disconnect the cable (2) from the TouchPad.
2. Slide the TouchPad bracket to the left (3) and then remove it.
3. Remove the TouchPad button board (4).
Reverse the above procedure to reassemble and install the TouchPad button board.
Battery on page 37)
Service access cover on page
Hard drive on page
Optical drive on page
Keyboard on page 47)
Top cover on page 49)
38)
39)
41)
Component replacement procedures
Spare part number
640885-001
55