Touchpad Button Board - HP g14 Maintenance And Service Manual

11. Remove the top cover (2).
Reverse this procedure to install the top cover.

TouchPad button board

Description
TouchPad button board (includes TouchPad cable, TouchPad button board cable, and double-
sided adhesive)
Before removing the TouchPad button board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the Battery (see
a.
Service cover (see
b.
Hard drive (see
c.
Optical drive (see
d.
Keyboard (see
e.
Top cover (see
Remove the TouchPad button board:
1.
Turn the top cover upside down with the front toward you.
2. Release the ZIF connector (1) to which the TouchPad cable is attached, and then disconnect the
TouchPad cable (2) from the TouchPad board.
46 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 29), and then remove the following components:
Service cover on page
Hard drive on page 31)
Optical drive on page
Keyboard on page 40)
Top cover on page 43)
30)
38)
Spare part number
767331-001