Security Cable Lock - HP PAVILION G6 Maintenance And Service Manual

Security cable lock

NOTE: The security cable lock is included with the base enclosure, spare part number 639569-001.
Before removing the security cable lock, remove the following components:
1. Battery (see
2. Service access cover (see
3. Hard drive (see
4. Optical drive (see
5. Keyboard (see
6. Top cover (see
Remove the security cable lock:
1. Remove the two Phillips 4.0 x 2.5 screws that secure the security lock to the base enclosure.
2. Lift the security lock straight up to remove it from the computer.
Reverse this procedure to install the security cable lock.
Battery on page 37)
Service access cover on page
Hard drive on page
Optical drive on page
Keyboard on page 47)
Top cover on page 49)
38)
39)
41)
Component replacement procedures 57