HP PAVILION G6 Maintenance And Service Manual page 59

Notebook pc
Hide thumbs Also See for PAVILION G6:
Table of Contents

Advertisement

5.
Remove the three Phillips 3.0 x 2.0 screws in the battery bay, two Phillips 3.0 x 2.0 screws in the
optical drive bay, and ten Phillips 6.0 x 2.5 on the base enclosure.
NOTE:
The four screws along the front edge also serve to secure the speakers inside the base
enclosure.
6.
Lift the rear edge of the top cover (1) until the top cover disengages from the base enclosure.
Remove the top cover (2).
NOTE:
The TouchPad is glued to the top cover and is included with the top cover spare part.
Component replacement procedures
51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents