MULTIQUIP RX 1510-C Operation Manual page 92

Maintaining the machine
Leaking hydraulic oils pollute the soil!
► Collect leaking hydraulic oil and dispose together with the hydraulic oil filter in
► Do not spill hydraulic oil.
► Collect leaking hydraulic oil, do not let it seep into the ground.
RF
SF
V
Leaking hydraulic oils pollute the soil!
► Dispose hydraulic elements in an environmentally friendly manner.
an environmentally friendly manner!
4) Unscrew the threaded plug
5) Loosen the runback filter
remove.
6) Loosen the screws
7) Loosen the intake filter element
remove.
8) Wash oil tank thoroughly. Clean sealing surfaces of the threaded plug
chassis.
9) Mount threaded plug
SF
10) Renew intake filter.
11) Fill in hydraulic oil through the opening of the runback intake filter until the fill level
has reached the middle of the oil sight glass.
RF
12) Renew runback filter.
13) Check the hydraulic system for leaktightness. ► Start engine and run it idle for
a short time. ► Re-examine oil fill level at the oil fill level sight glass and refill
again if necessary. Recommended types of oil see technical data.
ENVIRONMENT
S
and drain hydraulic oil into the container.
RF
with a spanner wrench, wrench size 27 and
V
with a spanner wrench, wrench size 46.
SF
with a spanner wrench, wrench size 70 and
S
with new gaskets.
ENVIRONMENT
– 92 –
RX 1510-C/-I/-CI
S
and