Display and operating elements:
Display
F
I
H
E
0.0
Meaning
F:
Stands for function
I:
Stands for infrared
transmitter.
H:
Stands for manual control.
E:
Stands for error.
Err:
Stands for error
Operating hour meter
– 50 –
RX 1510-C/-I/-CI
Lights up:
•
If an operator function is carried
out.
•
Always
in
combination
a numerical value, which represents
the function type. (see page 52
Section 4.4.2 Function codes)
•
The operator functions are carried
out with active infrared control
mode.
•
Always in combination with the
display F, for function and a numerical
value, which represents the function
type.
The code numbers of this function type
can be found on page 57-58 Section
4.4.6 Cockpit display with infrared
control.
•
The operator functions are carried
out with active cable control mode.
• Always in combination with the display
F, for function and a numerical
value, which represents the function
type.
The code numbers of this function type
can be found on page 53-54 Section
4.4.3 Cockpit display with cable
control.
•
If a function has an error
•
Always in combination with
a numerical value, which
represents the function type.
The error codes can be found on
page 98-99 Section 10.0 Malfunction
table.
•
If special errors occur.
The error codes can be found on
page 98-99 Section 10.0 Malfunction
table.
•
1 second after the function test of
the display (888888).
•
Flashes alternating with the starting
function S. -- 05, until the engine
has started or the cockpit switches
to stand-by.
with