Securing The Machine For Transport - MULTIQUIP RX 1510-C Operation Manual

Loading and transporting the machine
7.5

Securing the machine for transport

Transport position
1) Check whether the transport protection is applied. ► If not, apply the transport
protection.
2) Check whether the shutdown yoke is in the transport position (activated). ► If
the shutdown yoke is not in the transport position, then press it downwards to the
chassis of the machine and secure it with the retaining band
UK
3) Put the chock blocks
► The chock blocks must be aligned opposite to each other, since the machine
could otherwise move in one direction.
4) Hook the shackles into the transport
of the transport vehicle; tighten the machine symmetrical crosswise on the
UK
transport platform.
5) Check the load safeguard equipment again before transport.
6) Remove all loose items from the load and transport platform. ► Loose items can
TÖ
S
UK
fall off the vehicle when driving and endanger others.
on both sides of the machine centrically under the drums.
S
eyebolts
– 80 –
RX 1510-C/-I/-CI
SB .
SB
TÖ
of the machine and eyebolts
TÖ
S