During Maintenance Work - MULTIQUIP RX 1510-C Operation Manual

Safety instructions
2.5.2
• The vibration function of the machine causes the soil in the area of the drum to
vibrate considerably. Persons should not be exposed to these vibrations.
• When applying the vibration function, loose material, such as stones and clumps
of earth, can be hurled through the air. Persons, who are in the vicinity of the
drum can be hit and injured by these flying around objects. Therefore observe
a sufficient safety distance to the machine, in particular when the vibration
function is active.
• Damp and loose substrates substantially reduce the machine's grip on sloping
surfaces and inclines. When driving on inclines and sloping surfaces adjust the
speed of the machine to the terrain. Soil condition and weather influences impair
the climbing power of the machine. • Never drive up or down slopes steeper than
the maximum climbing ability of the machine. Never drive on slopes diagonally
Risk of tilting! • Always give way to loaded transport vehicles.

During maintenance work

• The hydraulic system is subject to a high pressure during operation.
Depressurise the hydraulic system before working on it. Only loosen or dismantle
parts of the hydraulic system when the diesel engine is turned off.
– 38 –
RX 1510-C/-I/-CI