MULTIQUIP RX 1510-C Operation Manual page 87

RX 1510-C/-I/-CI
Leaking lubricating oils pollute the soil!
► Collect leaking engine oil and dispose together with the oil filter in an
► Do not spill engine oil.
► Collect leaking fuel, do not let it seep into the ground.
AS
OF
7) Unscrew oil filter.
environmentally friendly manner!
8) Clean thread with a fibre-free rag.
9) Screw new oil filter in and only tighten by hand.
C
10) Screw plug onto the oil drain line again and secure with the
installation position of the line.
11) Fasten oil drain line
12) Refill engine oil (pay attention to viscosity - see technical data)
13) Pull the dipstick out.
14) Wipe the dipstick with a dry, fibre-free rag.
15) Insert the dipstick up to the stop in its fixture.
16) Pull the dipstick out again and read the oil level. ► The oil level should be
between the two markings. More engine oil must be filled in, if the oil level is too
low (only use engine oils with the same viscosity).
C
ENVIRONMENT
OF
AS A
with retaining clip
– 87 –
Maintaining the machine
B
B
clip. Observe
.