Maintenance Plan - MULTIQUIP RX 1510-C Operation Manual

Maintaining the machine
8.2

Maintenance plan

No.: Description:
9.8 –Check engine oil level
- Check machine for external damages
9.10 - Check hydraulic oil level
9.4 - Check fuel level
9.13 - Check cooling water level
9.7 - Check air filter
- Diesel engine see operating instructions Lombardini LDW 1003
- Check all bolts and screws for tightness
- Lubricate all lubrication nipples
9.5 - Check the fuel filter
- Diesel engine see operating instructions Lombardini LDW 1003
9.12 - Exchange the combination filters
9.17 - Service the battery
- Attention: Engine oil Diesel engine (see operating
instructions Lombardini LDW 1003)
9.7 - Replace air filter cartridge (earlier, if necessary)
9.18 - Tighten screws on side panels and at the articulation.
- Check all bolts and screws for tightness
9.5 - Exchange the fuel filter
- Inspect all diesel lines for leaks
- Diesel engine see operating instructions Lombardini LDW
9.16 1003 - exchanging line filters
9.11 - Change hydraulic oil (at least 1 x annually)
9.5 - Exchange the fuel filter
9.12 - Replace suction filter
9.19 - Adjusting stripper
- Check all bolts and screws for tightness
- Engine preservation
Every day
After 25 hours of operation
After 75 hours of operation
Every 100 operating hours
Every 200 operating hours
Every 500 operating hours
Every 1000 operating hours
As required
– 84 –
RX 1510-C/-I/-CI
Remarks:
– Observe gauge marking
- Visual inspection
- Oil level eye
- Fuel gauge
(Annex)
Tightening torques
(Annex)
Grease the terminals
(see Annex)
Tightening torques
(see Annex)
Tightening torques
see operating instructions
Lombardini LDW 1003
(Appendix)
Page:
82
85
78
89
81
79
87
93
81
94
96
79
80
86
79
87
94
96