RX 1510-C/-I/-CI
Start
Stop
The transmitter is ready for use as long as the toggle switch "Start-Stop" is in the
switch position "Neutral".
► Always turn the transmitter off by switching the toggle switch to "Stop" during
3) Depending upon required compaction force, switch the large or small vibration
on.
4) Drive over the area to be compacted several times, until it is completely
compacted.
5) After completing the compaction work drive the machine to a level area where
it is not an obstacle.
6) Stop the engine. If the machine is parked on a slope, safeguard it with chock
blocks.
breaks and after finishing work.
Start
Stop
Start
Stop
CAUTION
– 75 –
Operation:
F 4 I00