Pattern Editing - Toa NX-100 Installation Setup Manual

Chapter 4: SYSTEM SETTINGS (SETTING USING BROWSER)

5.2.2. Pattern editing

When the Pattern Edit button is pressed while a programmed broadcast pattern is selected in the pattern
selection area, the Edit of Pattern title and the name of the pattern before being changed are displayed. The
setting contents of the pattern are also displayed in the pattern edit area for editing.
This figure represents the NX-100.
Press the Save button to program the edited pattern. Pressing the Save button will update the NX-100/100S
setting file.
Caution
Never restart the unit or turn off the power during updates, or while the STATUS indicator on the front panel of
the NX-100/100S is flashing.
4-12