Network Setting - Toa NX-100 Installation Setup Manual

Network audio adapters

Hide thumbs Also See for NX-100:

Table of Contents

3. NETWORK SETTING

Set the NX-100/100S unit's network.

This figure represents the NX-100.

(1) IP Address

Enter the NX-100/100S unit's IP address. (Factory-preset to "192.168.1.1.")

(2) Subnet Mask

Set the mask address. (Factory-preset to "255.255.255.0.")

(3) Default Gateway

Enter the gateway address if the unit is being used outside its assigned subnet.

(Factory-preset to "0.0.0.0.")

Chapter 4: SYSTEM SETTINGS (SETTING USING BROWSER)

4-4

Table of Contents

Show Quick Links

Table of Contents

Nx-100s