Help; Buttons; Scanning Units - Toa NX-100 Installation Setup Manual

5.2.3. Help

Help: Displays help contents.
Version data: Indicates the version of the program in use.

5.3. Buttons

(1) (2)
(1) Unit scan button:
(2) Setting upload button: Writes the IP address, subnet mask, default gateway, and name into the selected

5.4. Scanning Units

Scans each unit connected to the LAN.
Step 1. Connect NX-100 and NX-100S units to the network and turn on each power.
The LNK/ACT Indicator will light.
Step 2. Either press the Unit Scan Button
The MAC address, IP address, subnet mask, default gateway, and unit name of the NX-100 and
NX-100S connected to the LAN will be displayed.
Default values are factory-preset as follows:
IP address:
Subnet mask:
Default gateway: 0.0.0.0
Name:
Caution
Units can only be scanned within the effective broadcast range. (See
For the units that cannot be scanned, manually add only the units connected to the LAN with the System
Setting Tool.
Scans all the units on the LAN.
units.
or select [Scan] → [Unit scan].
192.168.1.1
255.255.255.0
NX-100S or NX-100
Chapter 3: SYSTEM SETTINGS (NX-100 SETUP PROGRAM)
p. 6-3.)
3-10