Nx-100 - Toa NX-100 Installation Setup Manual

4. SPECIFICATIONS

4.1. NX-100

Power Source
Current Consumption
Audio Input
Audio Output
Frequency Response
Distortion
Control Input
Control Output
Network I/F
Network Protocol
Audio Packet
Transmission System
Operating Temperature
Operating Humidity
Finish
Dimensions
Weight
* 0 dB = 1 V
Note: The design and specifications are subject to change without notice for improvement.
• Optional products
Rack mounting bracket: MB-15B-BK (for rack-mounting one NX-100 unit)
AC adapter:
Note: When you need the AC adapter, be sure to consult your TOA dealer.
24 V DC (removable terminal block) or
AC adapter AD-246 (optional) or equivalent
200 mA (DC operation)
1 channel (transformer-isolated), –58 dB* to 0 dB*,
balanced (MIC/LINE changeable, volume adjustable with volume control),
2 kΩ, removable terminal block
1 channel (transformer-isolated), balanced, 600 Ω, removable terminal block
50 – 14,000 Hz (when sampling frequency is 32 kHz)
Under 0.3% (1 kHz, when sampling frequency is 32 kHz)
8 channels, no-voltage make contact input, open voltage: 12 V DC,
short-circuit current: 10 mA, removable terminal block
8 channels, open collector output (polarized), withstand voltage: 30 V DC,
control current: 50 mA max., removable terminal block
10BASE-T/100BASE-TX, Auto-Negotiation
TCP/IP, UDP, HTTP, RTP
Unicast (Up to 4 simultaneous transmissions),
Multicast (Up to 64 simultaneous transmissions)
0°C to +50°C (0°C to +40°C when AC adapter is in use)
Under 90% RH (no dew condensation should be produced)
Steel plate, black (30% glossy)
210 (w) x 46 (h) x 188 (d) mm
1.2 kg
MB-15B-J (for rack-mounting two NX-100 units)
AD-246
Chapter 6: APPENDIX
6-9