To Install Pc Card Support For Windows 95; To Install Infrared Support For Windows 95 - HP OmniBook 900 Evaluation Manual

Using Windows 95
Installing Windows 95
15. Click Cancel for the Internet Connection Wizard, then click Yes to
16. Restart the computer.
If you do not install the latest version of the Windows Media Player by
Note
running MPFULL.EXE. You may have a Suspend problem when playing
an audio or video file.

To Install PC Card support for Windows 95

If you've installed Windows 95, you'll need to install PC Card support.
This driver is located on the OmniBook's hard drive or on the Recovery
CD in \OMNIBOOK\DRIVERS\WIN95\PCCARD. It is located on the
OmniBook 900 B Recovery CD in
\OMNIBOOK\DRIVERS\W95\PCCARD.
1. Copy all files from the ..\PCCARD\950CONLY on the Recovery CD
2. Copy the PCMCIA.INF file from the ..\PCCARD\950CONLY on the
3. Click Yes to overwrite any files.
4. From Control Panel, open System, then Device Manager.
5. Remove both PCI CardBus Bridge devices under Other Devices. Click
6. Click on the Refresh button to redetect the Texas Instruments PCI TI-
7. Click Yes to restart Windows 95.
8. From Control Panel, double-click PC Card (PCMCIA).
9. The PC Card (PCMCIA) Wizard starts, click Next.
10. Click Next.
11. Click Finish.
12. Click Yes to shut down and turn off the OmniBook.

To install infrared support for Windows 95

If you've installed Windows 95 and you wish to use infrared, you'll need
to install infrared support. These drivers are located on the OmniBook's
hard drive or on the Recovery CD in
\OMNIBOOK\DRIVERS\WIN95\IRDA and in
\OMNIBOOK\DRIVERS\WIN95\FASTIR. They are located on the
5-8
confirm.
to C:\WINDOWS\OPTIONS\CABS.
Recovery CD to C:\WINDOWS\INF.
OK in the Confirm Device Removal dialog box each time.
1225 Cardbus Controller.