To Install Full Touch Pad Capabilities - HP OmniBook 900 Evaluation Manual

Install pointing stick support
The pointing stick driver is on the OmniBook 900 Recovery CD at
\OMNIBOOK\DRIVERS\WIN95\TRACKPNT.
The pointing stick driver is on the OmniBook 900 B Recovery CD at
\OMNIBOOK\DRIVERS\W95\TRACKPNT.
1. From Control Panel, double-click Mouse, then General.
2. Click the Change button.
3. Click Have Disk.
4. Enter the directory of the pointing stick drivers on the Recovery CD
and click OK.
5. Click OK to accept the IBM PS/2 TrackPoint driver.
6. Close the Mouse Properties window.
7. Click Yes to restart Windows.

To install full touch pad capabilities

The default PS/2 Mouse driver supports only basic touch pad features. To
activate full touch pad capabilities, you have to
•
Disable the pointing stick.
•
Install touch pad support.
Disable the pointing stick
1. From the Start menu, shut down, then restart the OmniBook.
2. When you see the HP logo, press F2 to enter the BIOS Setup utility.
3. Select the System Devices menu.
4. Highlight Internal Pointing Devices and select Touch Pad.
5. Press F10 to save and exit.
Install touch pad support on the OmniBook 900
1. From the Start menu, click Run.
2. Enter \OMNIBOOK\DRIVERS\WIN95\TOUCHPAD\Setup.exe on the
Recovery CD and click OK.
3. Click Agree at the License Agreement.
4. Click Express Setup.
5. Click Finish to restart the computer.
6. After reboot, Click Yes to install the Touchpad.
7. Click next at the Welcome screen.
8. Select the button you use for Selecting and click Next.
Using Windows 95
Installing Pointing Device Support
5-13