Installing Intel Speedstep Technology Applet; To Install The Intel Speedstep Technology Applet - HP OmniBook 900 Evaluation Manual
Hide thumbs
Also See for OmniBook 900:
- User handbook manual (114 pages) ,
- Service manual (98 pages) ,
- User manual (76 pages)
Table of Contents
Advertisement
Installing Intel® SpeedStep( Technology Applet
Installing Intel
If you've installed a retail version of Windows NT 4.0, you'll need to
®
install the Intel
SpeedStep
Pentium III processor.
This section describes how to
♦ Install the Intel SpeedStep Technology Applet.
To install the Intel SpeedStep Technology Applet
The Intel SpeedStep files are located on the hard drive under:
\OMNIBOOK\DRIVER\SPEEDSTP
and on the Recovery CD under:
\OMNIBOOK\DRIVER\SPEEDSTP
1. Open Windows Explorer.
2. Click the View Menu, then Options.
3. Select "Show all files" and uncheck "Hide file extensions for known
file types", then click OK.
4. Copy PRPCLDR.EXE from the SpeedStep directory to the
<WINNT>\System32 directory.
5. Double-click PRPCLDR.REG in the SpeedStep directory, then click
OK.
6. Double-click SETUP.EXE in the SpeedStep directory.
7. When prompted, click NEXT.
8. Click FINISH to reboot the OmniBook.
®
SpeedStep
technology Applet if you have a dual-speed
Using Windows NT 4.0
Technology Applet
6-15
Advertisement
Table of Contents
