Internal Connectors - Asus H97M-PLUS Manual

1.7.2

Internal connectors

1. Serial port connector (10-1 pin COM)
This connector is for a serial (COM) port. Connect the serial port module cable to this
connector, then install the module to a slot opening at the back of the system chassis.
H97M-PLUS
H97M-PLUS Serial port (COM) connector
The COM module is purchased separately.
2. CPU and chassis fan connectors (4-pin CPU_FAN, and 4-pin CHA_FAN1/2)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
H97M-PLUS
H97M-PLUS Fan connectors
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside
the system may damage the motherboard components. These are not jumpers! DO NOT
place jumper caps on the fan connectors.
The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power.
ASUS H97M-PLUS
COM
PIN 1
CHA_FAN2
CPU_FAN
CHA_FAN1
1-13