Jumpers; Irq Assignments For This Motherboard; Clear Rtc Ram - Asus H97M-PLUS Manual

IRQ assignments for this motherboard

PCIEx16_1
PCIEx16_2
PCI_1
PCI_2
Intel LAN controller
EHCI0
EHCI1
HD audio
SATA controller 0
SATA controller 1
XHCI
I.G.F.X
1.6

Jumpers

Clear RTC RAM (3-pin CLRTC)
This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can
clear the CMOS memory of date, time, and system setup parameters by erasing the
CMOS RTC RAM data. The onboard button cell battery powers the RAM data in
CMOS, which include system setup information such as system passwords.
H97M-PLUS
H97M-PLUS Clear RTC RAM
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3
for about 5-10 seconds, then move the cap back to pins 1-2.
3. Plug the power cord and turn ON the computer.
4. Hold down the <Del> key during the boot process and enter BIOS setup to re-
enter data.
Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default
position. Removing the cap will cause system boot failure!
1-10
A B C
shared – –
shared – –
– – –
shared – –
– – –
– – –
shared – –
– – –
– – –
– – –
– – –
shared – –
CLRTC
1 2
2 3
Normal Clear RTC
(Default)
D E F
– – –
– – –
shared – –
– – –
– shared –
– – –
– – –
– – –
shared – –
shared – –
– – shared
– – –
Chapter 1: Product introduction
G H
– –
– –
– –
– –
– –
– shared
– –
shared –
– –
– –
– –
– –