Asus H97M-PLUS Manual page 70

2.8.1 Fast Boot [Enabled]
[Enabled]
[Disabled]
The following five items appear when you set Fast Boot to [Enabled].
SATA Support [All Devices]
[All Devices]
[Hard Drive Only]
[Boot Drive Only]
USB Support [Partial Initialization]
[Disabled]
[Full Initialization]
[Partial Initialization]
PS/2 Keyboard and Mouse Support [Auto]
Select any of these settings when PS/2 keyboard and mouse are installed. These settings
only apply when Fast Boot is enabled.
[Auto]
[Full Initialization] For full system control, PS/2 devices will be available during POST at any
[Disabled]
Network Stack Driver Support [Disabled]
[Disabled]
[Enabled]
Next Boot after AC Power Loss [Normal Boot]
[Normal Boot]
[Fast Boot]
2‑36
Select to accelerate the boot speed.
Select to go back to normal boot.
All devices connected to SATA ports will be available during
POST. This process will extend the POST time.
Only hard drives connected to SATA ports will be detected during
POST. Any hardware change will disable fast boot.
Only boot drive connected to SATA ports will be detected during
POST. Any hardware change will disable fast boot.
All USB devices will not be available until OS boot up for a
fastest POST time.
All USB devices will be available during POST. This process will
extend the POST time.
For a faster POST time, only the USB ports with keyboard and
mouse connections will be detected.
For a faster POST time, PS/2 devices will only be available when the
system boots up or rebooted when the PS/2 devices have not been
reconnected or changed. If you disconnect or change PS/2 devices before
restarting the system, PS/2 devices will not be available and BIOS setup
program will not be accessible via PS/2 devices.
circumstances. This process will extend POST time.
For the fastest POST time, all PS/2 devices will not be available until your
computer enters the operating system.
Select to skip the network stack driver from loading during POST.
Select to load the network stack driver during POST.
Returns to normal boot on the next boot after AC power loss.
Accelerates the boot speed on the next boot after AC power loss.
Chapter 2: Getting started