Asus H97M-PLUS Manual page 71

2.8.2 Boot Logo Display [Auto]
[Auto] Adjusts the logo size automatically based on Windows® display
requirements.
[Full Screen] Maximize the boot logo size.
[Disabled] Hide the logo during POST.
POST Delay Time [3 sec]
This item appears only when you set Boot Logo Display to [Enabled]. This item allows you to
select the desired additional POST waiting time to easily enter the BIOS setup. You can only
execute the POST delay time during Normal Boot. The values range from 0 to 10 seconds.
This feature will only work under normal boot.
Post Report [5 sec]
This item appears only when you set Boot Logo Display to [Disabled]. This item allows you to
select a desired post report waiting time. Configuration options: [1 sec] ~ [10 sec] [Until Press
ESC].
2.8.3 Bootup NumLock State [Enabled]
Allows you to enable or disable the keyboard NumLock during the system boot. Configuration
options: [Enabled] [Disabled]
2.8.4 Wait for 'F1' If Error [Enabled]
When this item is set to [Enabled], the system waits for the F1 key to be pressed when error
occurs. Configuration options: [Disabled] [Enabled]
2.8.5 Option ROM Messages [Enabled]
[Enabled] The option ROM messages will be shown during the POST (Power‑on self‑
test).
[Disabled] Only the ASUS logo will be shown during POST.
2.8.6 Interrupt 19 Capture [Disabled]
[Enabled] Allows the option ROMs to trap Interrupt 19.
[Disabled] Disables this function.
2.8.7 Above 4G Decoding [Disabled]
Enables or disables 64bit capable devices to be decoded in above 4G address space (Only if
the system supports 64‑bit PCI decoding). Configuration options: [Disabled] [Enabled]
2.8.8 Setup Mode [EZ Mode]
[Advanced Mode] Sets Advanced Mode as the default screen for entering the BIOS setup
program.
[EZ Mode] Sets EZ Mode as the default screen for entering the BIOS setup program.
ASUS H97M-PLUS 2‑37