Encoder Profile - Bosch VIP X1600 Installation And Operating Manual

VIP X1600
5.11

Encoder Profile

For encoding the video signal you can select two profiles for each encoder (video input) and
change the presets for the profiles.
You can adapt the MPEG-4 data transmission to the operating environment (for example
network structure, bandwidth, data load). To this end, the VIP X1600 module simultaneously
generates two data streams (Dual Streaming) for each video input. You can select the
compression settings of these data streams individually, for example one setting for
transmissions to the Internet and one for LAN connections.
NOTICE!
i
You must set the parameters for each camera input and for each stream individually. The
names Video 1 to Video 4 correspond to the labeling of the video inputs on the module.
Pre-programmed profiles are available, each giving priority to different perspectives.
–
–
–
–
–
–
–
–
Bosch Security Systems
Profile 1: Low bandwidth (CIF)
High quality for low bandwidth connections,
resolution 352 × 288/240 pixels
Profile 2: Low delay (2/3 D1)
High quality with low delay, resolution 464 × 576/480 pixels
Profile 3: High resolution (4CIF/D1)
High resolution for high bandwidth connections,
resolution 704 × 576/480 pixels
Profile 4: DSL
For DSL connections with 500 kbps, resolution 352 × 288/240 pixels
Profile 5: ISDN (2B)
For ISDN connections via two B-channels, resolution 352 × 288/240 pixels
Profile 6: ISDN (1B)
For ISDN connections via one B-channel, resolution 352 × 288/240 pixels
Profile 7: Modem
For analog modem connections with 20 kbps, resolution 352 × 288/240 pixels
Profile 8: GSM
For GSM connections at 9,600 baud, resolution 176 × 144/120 pixels
Installation and Operating Manual
Configuration Using a Web Browser | en 37
V3.5 | 2007.12