Basic Mode: Encoder Profile - Bosch VIP X1600 M4S Installation And Operating Manual

30 en | Configuration Using a Web Browser
Subnet mask
Enter the appropriate subnet mask for the selected IP address here.
Gateway address
If you want the module to establish a connection to a remote location in a different subnet,
enter the IP address of the gateway here. Otherwise leave the box blank (0.0.0.0).
5.6

Basic Mode: Encoder Profile

Video input
Select a video input for the module here; the profile selected in the next field will be applied
to this input. You can select a specific profile for each video input.
Active profile
You can select a profile for encoding the video signal.
You can use this to adapt the video data transmission to the operating environment (for
example network structure, bandwidth, data load).
Pre-programmed profiles are available, each giving priority to different perspectives. When
selecting a profile, details are displayed in the list field.
–
–
–
–
–
–
DOC | V4.0 | 2009.06
Low bandwidth (CIF)
High quality for low bandwidth connections, resolution 352 × 288/240 pixels
Low delay (2/3 D1)
High quality with low delay, resolution 464 × 576/480 pixels
High resolution (4CIF/D1)
High resolution for high bandwidth connections, resolution 704 × 576/480 pixels
DSL
For DSL connections with 500 kbps, resolution 352 × 288/240 pixels
ISDN (2B)
For ISDN connections via two B-channels, resolution 352 × 288/240 pixels
ISDN (1B)
For ISDN connections via one B-channel, resolution 352 × 288/240 pixels
Installation and Operating Manual
VIP X1600 M4S
Bosch Security Systems