Encoder Profile - Bosch VideoJet X10 Installation And Operation Manual

38 en | Configuration Using a Web Browser
5.11

Encoder Profile

For encoding the video signal you can select two profiles and change the presets for the
profiles.
You can adapt the MPEG-4 data transmission to the operating environment (for example
network structure, bandwidth, data load). To this end, the VideoJet X10 simultaneously
generates two data streams (Dual Streaming). You can select the compression settings of
these data streams individually, for example one setting for transmissions to the Internet and
one for LAN connections.
NOTICE!
i
The settings must be made individually for each stream.
Pre-programmed profiles are available, each giving priority to different perspectives.
–
–
–
–
–
–
–
–
V3.0 | 2007.09
Profile 1: Low bandwidth (CIF)
High quality for low bandwidth connections,
resolution 352 × 288/240 pixels
Profile 2: Low delay (2/3 D1)
High quality with low delay, resolution 464 × 576/480 pixels
Profile 3: High resolution (4CIF/D1)
High resolution for high bandwidth connections,
resolution 704 × 576/480 pixels
Profile 4: DSL
For DSL connections with 500 kbps, resolution 352 × 288/240 pixels
Profile 5: ISDN (2B)
For ISDN connections via two B-channels, resolution 352 × 288/240 pixels
Profile 6: ISDN (1B)
For ISDN connections via one B-channel, resolution 352 × 288/240 pixels
Profile 7: Modem
For analog modem connections with 20 kbps, resolution 352 × 288/240 pixels
Profile 8: GSM
For GSM connections at 9,600 baud, resolution 176 × 144/120 pixels
Installation and Operating Manual
VideoJet X10
Bosch Security Systems