Video Input; Source Type - Bosch VIP X1600 Installation And Operating Manual

42 en | Configuration Using a Web Browser
5.13

Video Input

You can activate the 75 Ohm terminating resistance for each video input on the VIP X1600
module. The terminating resistance must be deactivated for the video signal to be looped
through. Every video input is closed at the time of delivery.
NOTICE!
i
The numbering follows the labeling of the video inputs on the module.
5.13.1 75 Ohm termination
Select Off if the video signal is to be looped through.
5.13.2

Source type

To allow VCRs to be connected as a video source, you can change the characteristic of the
video source from the preset value of Camera to VCR. VCRs require a more tolerant setting
for the internal PLL as a result of jitter effects caused by the mechanical components of a
VCR.
NOTICE!
i
In some cases, selecting the VCR option can lead to an improvement in the video image even
with a camera connected.
V3.5 | 2007.12 Installation and Operating Manual
VIP X1600
Bosch Security Systems