HP PhotoSmart 812 User Manual page 66

Message
Cannot display
image
Unable to
communicate with
the printer
66
Possible cause
Possibly comes
from copying
images to the
card from a
computer or a
corrupted
image caused
by the camera
not shutting
down properly.
There is no
connection
between the
camera and
printer.
A supported
printer is either
turned off or not
connected to
the camera.
hp photosmart 812 user's manual
Solution
Use the HP software to
edit the images copied
on the card. Also, do not
remove batteries or the
memory card when the
camera is turned on.
Make sure the cables are
connected between the
camera or camera dock
and the printer. If that
does not work, turn off
the camera and
disconnect it. Turn the
printer off and then on
again. Re-connect the
camera and turn it on.
Make sure the camera is
connected to a supported
printer and that the
printer is turned on.