HP PhotoSmart 812 User Manual page 59

Problem
My image is
blurry.
7-Troubleshooting
Possible cause Solution
Your subject
was too close
to the camera
lens.
The subject
wasn't
centered in
the frame or
the subject
did not
provide
enough
contrast for
the camera to
focus
properly.
You moved
the camera
while you
took the
picture.
The scene was
dark so the
exposure was
long.
Do not try to get closer than the
camera's minimum focus
range of 0.14m (~5.5 inches)
wide angle and 0.4m (~15.7
inches) at other focal lengths.
You can lock the focus by
pointing at your subject and
then pressing and holding the
Shutter button halfway down.
Re-frame your subject, then
press the Shutter button all the
way down.
Hold the camera steady as you
press the Shutter button or use
a tripod.
Turn on flash or use a tripod.
59