HP PhotoSmart 812 User Manual page 61

Problem
My image is
too bright.
7-Troubleshooting
Possible cause Solution
The flash
provided too
much light.
A natural or
artificial
source other
than the flash
provided too
much light.
You were too
close to the
subject to use
the flash.
Change the flash setting to
Flash Off.
Try taking the picture from a
different angle. Avoid pointing
the camera directly toward a
bright light or reflective surface
on a sunny day. If there is light
behind your subject, use the
Flash On.
Move back from the subject or
set the flash to Flash Off and
take the picture again.
61