Cisco DPC2425 DOCSIS User Manual page 36

How Do I Configure My DOCSIS Residential Gateway?
Setup Basic Settings - Enable/Disable Time Synchronization by
Network Time Protocol
The following illustration is the initial view of the Basic Settings Enable/Disable
time synchronization by Network Time protocol page.
Setup Basic Settings - Enable/Disable Time Synchronization by
Network Time Protocol Page Description
The following table provides a description of the fields within the Basic Settings
Enable/Disable time synchronization by Network Time protocol page.
Field Name
Current System Time
Network Time Protocol
Latest Update Success
Time Zone
36
Description
Displays the current system time and date
Allows you to enable or disable network time
protocol
Note: The residential gateway will automatically
use the time server in your broadband network.
Should there be no current time displayed or if the
network time is incorrect, enable Network Time
Protocol to use a public Internet time server to set
the clock in the gateway.
Displays the time and date of the last successful
time update
Displays the current time zone. The drop-down
list allows you to select your local time zone.
4028315 Rev A