Cisco DPC2425 DOCSIS User Manual page 87

Field Name
54g Network Mode
Basic Rate Set
54g Protection
Xpress Technology
Afterburner
Technology
Rate
Output Power
4028315 Rev A
Description
Allows you to optimize the performance of your
wireless network using one of the following options:
Max compatibility (factory default)
Allows the access point to interoperate with both
802.11b and 802.11g wireless client devices and
minimizes interference with nearby 802.11b
wireless networks.
54g Only
The wireless access point will only accept 802.11g
wireless clients.
Max Performance
Maximum throughput. In this mode, the wireless
access point accepts only 802.11g wireless clients.
Setting the device in this mode may degrade the
operation of near by 802.11b wireless networks.
Allows you to select the Basic Rate Set
Allows you to prioritize 802.11g communication when
there is a mix of 802.11b and 802.11g devices in the
wireless network using one of the following options:
Auto (factory default)
Maximize 802.11g performance in networks with a
mix of 802.11b and 802.11g wireless client devices.
Off
Maximum performance. Networks with 802.11g-
only wireless client devices.
Allows you to enable or disable Xpress Technology
Allows you to enable or disable Afterburner
Technology
Allows you to fix the data rate for wireless connections.
The following data rates are available:
Auto (factory default), 1 Mbps, 2 Mbps, 5.5 Mbps,
6 Mbps, 9 Mbps, 11 Mbps, 12 Mbps, 18 Mbps,
24 Mbps, 36 Mbps, 48 Mbps, 54 Mbps
Note: In the automatic mode, data rate is a function of
signal strength and signal quality.
Allows you to adjust the relative output power of your
gateway wireless transmitter. The following settings
are available:
100% (factory default), 75%, 50%, and 25%
How Do I Configure My DOCSIS Residential Gateway?
87