Cisco DPC2425 DOCSIS User Manual page 82

How Do I Configure My DOCSIS Residential Gateway?
Field Name
WPA/WPA2 Re-auth
Interval
WEP Encryption
Shared Key
Authentication
802.1x Authentication
82
Description
Allows you to set the WPA/WPA2 Re-authorization
Interval in seconds. This only applies when WPA/WPA2
Network Authentication is enabled.
Set this value to 0 (factory default) to disable periodic
rekeying. The valid range is 1 to 4,294,967,295 seconds.
Allows you to enable data encryption to help secure the
data that is sent over your wireless network.
WEP 128-bit
128-bit or-64 bit static key data encryption can be
selected when the network is configured to have no
authentication.
128-bit static key data encryption is automatically
selected when 802.1x network authentication is
enabled.
Notes:
Static key authentication uses one of the four
encryption keys, as defined below, to encrypt your
data. You must manually change keys. The keys do
not change or rotate automatically as they do with
TKIP.
64-bit and 40-bit encryption are two different names
for the same encryption
128-bit and 104-bit encryption are two different
names for the same encryption
Allows you to determine is Shared Key Authentication is
used in the network. Shared Key Authentication can be
used when there is no other network authentication in the
network.
Optional - (factory default)
Wireless clients can associate with the wireless access
point without authentication.
Required - Only wireless clients with a valid network
key are allowed to associate with the access point.
Allows you to use 802.1x authentication with WEP
encryption (similar to when WPA or WPA2 is enabled)
4028315 Rev A