Cisco DPC2425 DOCSIS User Manual page 104

Front Panel LED Status Indicator Functions
Normal Operations (AC Power applied)
The following chart illustrates the appearance of the residential gateway front panel
LED status indicators during normal operations when AC power is applied to the
gateway.
Front Panel LED Status Indicators During Normal Conditions
Front Panel Indicator
1 POWER
2 DS
3 US
4 ONLINE
5 LAN1-LAN4
6 WIRELESS
7 TEL 1
8 TEl 2
104
Normal Operations
On
On
On
On
On - When a single device is connected to the Ethernet port
and no data is being sent to or from the modem
Blinks - When only one Ethernet device is connected and
data is being transferred between the consumer premise
equipment (CPE) and the wireless home gateway
Off - When no devices are connected to the Ethernet ports
On - When the wireless access point is enabled and
operational
Blinks - When data is being transferred between the CPE
and the wireless home gateway
Off - When the wireless access point is disabled by the user
On - When telephony service is enabled
Blinks - When line 1 is in use
On - When telephony service is enabled
Blinks - When line 2 is in use
4028315 Rev A