Cisco DPC2425 DOCSIS User Manual page 59

Setup Advanced Settings - VPN Setup Page Description
This section describes the section headings and field descriptions of the Setup
Advanced Settings - VPN Setup page. This page allows you create, configure, and
control IPsec VPN tunnels.
Tunnel Section
Field Name
Tunnel
Name
Enable/Disable
Function Keys
The following table describes the function keys associated with the Tunnel section of
the VPN Setup page.
Key
Delete Tunnel
Add New Tunnel
Apply
Local Endpoint Settings
The following table describes the fields in the Local endpoint settings section of the
VPN Setup page.
Field Name
Address group type
4028315 Rev A
Description
Displays existing tunnels and allows each tunnel to be individually
configured
Displays the name of a group of settings for a single tunnel. If no name
is entered, the tunnels are named sequentially 1, 2, 3, and so on
Enables/disables a VPN tunnel after the tunnel is named and
configured. Click Apply to activate the selected setting (Enabled or
Disabled)
Description
Allows you to delete a tunnel
Allows you to create a heading for the tunnel settings that you can
select using the Tunnel drop-down menu
Activates the selected setting (Enabled or Disabled)
Description
Allows you to select the address group type for the local VPN access
group. The following types are available:
IP subnet
Single IP address
IP address range
How Do I Configure My DOCSIS Residential Gateway?
59